Search found 26 matches
- 13 Dec 2016, 13:48
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: [FIXED] Strobe Utility does not work in my Windows10
- Replies: 9
- Views: 9490
Re: Strobe Utility does not work in my Windows10
So i turned off monitor, i pressed #4 for 5 sec and then i press power and nothing happens. If i press any button, backlight for 'power' button turns on and becomes inactive. The only way i can press power is if no other buttons are pressed. Maybe i'm doing something incredibly stupid though :( http...
- 11 Dec 2016, 05:54
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: [FIXED] Strobe Utility does not work in my Windows10
- Replies: 9
- Views: 9490
Re: Storobe Utility does not work in my Windows10
Hi, please use the service menu if you can't use the strobe utility. Entry Codes are in the sticky on general section. The strobe utility is a front end for the service menu, which has more adjustments (including ability to set strobe phase up to 100 when NOT using Vertical Total tweaks). I tried f...
- 26 Jun 2015, 19:53
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: forcing 120Mhz in games
- Replies: 18
- Views: 13779
Re: forcing 120Mhz in games
doesn't change the fact that it's almost impossible to get 120Hz in some games. especially console clones that are probably capped at @60Hz anyway. my solution seems 'stupid' to me, so the fact that the game starts in windowed mode that cannot be changed with alt + enter into full screen doesn't mak...
- 26 Jun 2015, 09:52
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: forcing 120Mhz in games
- Replies: 18
- Views: 13779
Re: forcing 120Mhz in games
after few hours of fighting i found out to make this stupid game work with this trick i have to first run it in 1920x1080 fullscreen, then change to 1920x1078 fullscreen. ALT-TAB, go back to game and it's working. BUT if i close the game and run it again, it will start in window mode (even though in...
- 26 Jun 2015, 08:51
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: forcing 120Mhz in games
- Replies: 18
- Views: 13779
Re: forcing 120Mhz in games
now i have the same problem (stuck in 60Hz) and 1920x1078 trick doesn't work. game is Dark Souls 2 I even tried downloading some mods for the game that have something to do with downsampling and allowing to tweak resolutions etc. (GeDoSaTo mod) http://blog.metaclassofnil.com/?page_id=582 , i changed...
- 07 Jun 2015, 19:37
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: forcing 120Mhz in games
- Replies: 18
- Views: 13779
Re: forcing 120Mhz in games
so, should i keep GPU scaling off or should i change it to on?
- 07 Jun 2015, 17:28
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: forcing 120Mhz in games
- Replies: 18
- Views: 13779
Re: forcing 120Mhz in games
can i force 1:1 up-scaling in CRU? i don't see option for this
I have 'enable GPU scaling' in AMD Catalyst set to off
I have 'enable GPU scaling' in AMD Catalyst set to off
- 07 Jun 2015, 16:43
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: forcing 120Mhz in games
- Replies: 18
- Views: 13779
Re: forcing 120Mhz in games
just a small correction, it's 1078 not 1076, at least this is what masterotaku suggested, and it's what i'm using.
it's a shame that's the only way now, but a slighty distorted image like that is unnoticable for human eye i think... right?
it's a shame that's the only way now, but a slighty distorted image like that is unnoticable for human eye i think... right?
- 07 Jun 2015, 14:52
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: forcing 120Mhz in games
- Replies: 18
- Views: 13779
Re: forcing 120Mhz in games
I use AMD this is my CRU http://snag.gy/QUuoG.jpg and it doesn't work... i restarted drivers using restart64.exe from latest CRU 1.2 UPDATE: i also tried 1920x1078 trick - http://snag.gy/xSiRp.jpg, even though i added it as a new resolution, changed it in game settings it's still @60. ( i see that i...
- 07 Jun 2015, 13:29
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: forcing 120Mhz in games
- Replies: 18
- Views: 13779
forcing 120Mhz in games
Hello i'm using tweaked setttings (VT trick) for my Benq Z series monitor, but in FIFA15 refresh rate seems to be fixed at 60Mhz. Is there any way to force it to be at 120Mhz? in CRU i removed 1920x1080@60 as viable option, but it didn't change a thing, fifa still runs at @60 and there is no setting...