Vertical 1350 and Crosstalk Question

Discuss BENQ Blur Reduction (strobe backlight) and the Blur Busters Strobe Utility. For Z-Series monitors (V2 firmware) on XL2411Z, XL2420Z and XL2720Z.

Re: Vertical 1350 and Crosstalk Question

Postby RealNC » 15 May 2017, 00:08

I was actually referring to being able to see mouse poll rate related micro-stutter. 1000Hz poll rate with 125FPS vs 1000Hz poll rate with 144FPS, for example.
The views and opinions expressed in my posts are my own and do not necessarily reflect the official policy or position of Blur Busters.
User avatar
RealNC
 
Posts: 1066
Joined: 24 Dec 2013, 18:32

Re: Vertical 1350 and Crosstalk Question

Postby Chief Blur Buster » 16 May 2017, 11:30

RealNC wrote:I was actually referring to being able to see mouse poll rate related micro-stutter. 1000Hz poll rate with 125FPS vs 1000Hz poll rate with 144FPS, for example.

I need to test officially with 2000Hz mice, but using extreme variables I can see very faint 1000Hz microstutters, but only in this test:
- Strobed mode
- Strobe pulsewidths of 0.5 to 1ms (so tiny text in web browser windows still remain fully readable at full speed left-to-right mousedrags). This necessitates lowering the "ULMB Duty". This reduces motion blurring down to 0.5 pixel or 1 pixel per 1000 pixels/second
- Open browser page full of fine text (10 point or so)
- Fast windowdrag speeds of 2500 pixels/second (1 screenwidth per second on 2560x) -- about ~1 pixels of motion blurring during low ULMB Pulse Width settings.

The tiny text is very microstuttery with even 1000Hz mousepolls and not as fluid as http://www.testufo.com/#test=framerates-text&pps=1920

I have not currently done extensive game tests but it would require ultrahighdetail settings where critical details are one-pixel-widths similar to 10 point text. This would be more important for virtual reality type situations, e.g. trying to read fine text on walls while running past, etc.
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter!
User avatar
Chief Blur Buster
Site Admin
 
Posts: 3259
Joined: 05 Dec 2013, 15:44

Re: Vertical 1350 and Crosstalk Question

Postby RealNC » 17 May 2017, 01:32

Chief Blur Buster wrote:using extreme variables I can see very faint 1000Hz microstutters, but only in this test:
- Strobed mode

Which is exactly what I claimed in my original post :)
The views and opinions expressed in my posts are my own and do not necessarily reflect the official policy or position of Blur Busters.
User avatar
RealNC
 
Posts: 1066
Joined: 24 Dec 2013, 18:32

Previous

Return to BENQ Blur Reduction & Strobe Utility

Who is online

Users browsing this forum: Sparky and 2 guests