Blur Busters Forums

Who you gonna call? The Blur Busters! For Everything Better Than 60Hz™ Skip to content

xl2411z to V4?[V4 download link & flash instructions]

Discuss BENQ Blur Reduction (strobe backlight) and the Blur Busters Strobe Utility. For Z-Series monitors (V2 firmware) on XL2411Z, XL2420Z and XL2720Z.

Re: xl2411z to V4?[V4 download link & flash instructions]

Postby Falkentyne » 16 Mar 2016, 12:22

Turn the settings burn-in to off in the factory menu that appeared.
Falkentyne
 
Posts: 2348
Joined: 26 Mar 2014, 07:23

Re: xl2411z to V4?[V4 download link & flash instructions]

Postby Edgarchik » 16 Mar 2016, 12:28

Falkentyne wrote:Turn the settings burn-in to off in the factory menu that appeared.

yeah thank you =) just fixed it right before you answer
but still have issue
Everytime I turn off->on monitor I have to re set my ama settings high->off->high because its fucking up each time I turn off monitor
is it intended or it can be fixed somehow?
Edgarchik
 
Posts: 13
Joined: 27 Dec 2014, 09:42

Re: xl2411z to V4?[V4 download link & flash instructions]

Postby Piaer » 29 May 2016, 17:33

Thanks for instructions.

Worked perfectly on my PC. MSI GTX 960 by DVI port. Was upgrading from V3.

Note: My bus was 0 - so don't forget to change it for the flashing process (tutorial omits that at the end)
Piaer
 
Posts: 1
Joined: 29 May 2016, 17:32

Re: xl2411z to V4?[V4 download link & flash instructions]

Postby Lagahan » 03 Apr 2017, 11:56

Looks like the svn is down at flashrom; "Can't connect to host 'flashrom.org': Network is unreachable"

Any ideas on how to proceed? I wan't to go from V3 to V4 on my 2411z using the guide.

EDIT: MY BAD: this post fixes the issue: viewtopic.php?f=13&t=779&start=440#p24110

EDIT 2: Done! Works perfectly, had to use i2c bus 0 on my old laptop that has a VGA port attached to a Quadro NVS 320 and had to use the different flashrom url but it was done quite quickly then in the end up. Crazy how you can do stuff like this with Linux, I don't use it often myself. Saves us from having to get a hardware solution!
User avatar
Lagahan
 
Posts: 9
Joined: 27 Dec 2014, 07:30
Location: Ireland

Re: xl2411z to V4?[V4 download link & flash instructions]

Postby Chief Blur Buster » 03 Apr 2017, 22:00

Lagahan wrote:EDIT 2: Done! Works perfectly, had to use i2c bus 0 on my old laptop that has a VGA port attached to a Quadro NVS 320 and had to use the different flashrom url but it was done quite quickly then in the end up. Crazy how you can do stuff like this with Linux, I don't use it often myself. Saves us from having to get a hardware solution!

Glad it is working now!
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter!
User avatar
Chief Blur Buster
Site Admin
 
Posts: 3464
Joined: 05 Dec 2013, 15:44

Previous

Return to BENQ Blur Reduction & Strobe Utility

Who is online

Users browsing this forum: No registered users and 7 guests