Hi,
I've just received my xl2411z v4.
I got very weird bug when I plug my screen to my DVI-D port (HD6870) .
Here is a screen
http://s30.postimg.org/rfyonfmao/20160104_211943_1.jpg
So to clarify, it only happens when I use the DVI-D port with 60hz and it gets better when I increase the refresh rate
144hz and 120hz : random blue and green pixel like the screen above but without black line
100hz : looks actually good but not perfect
60hz : the worst (screen)
Ingame is terrible also at pretty much every resolution 16:9 16:10 4:3 (although 1024x768 is perfect...)
HDMI and DVI-I both ports look good (but i'm stuck with 60hz). Driver is up to date.
I'm not sure whether or not I should send my monitor back or change the graphic card.
Any thoughts ?
artefacts and weird pixel XL2411z
- lexlazootin
- Posts: 1251
- Joined: 16 Dec 2014, 02:57
Re: artefacts and weird pixel XL2411z
Looks broke yo.
Sounds like a hardware problem if it's only that one port.
Sounds like a hardware problem if it's only that one port.
Re: artefacts and weird pixel XL2411z
yeah :'( I've ordered a new card, we will see.
Also, i'm following this guide https://pcmonitors.info/articles/using- ... n-windows/ for the ICC profile but it doesn't work properly for me.
Whenever I set a new profile with "Set as Default Profile", the monitor colors are changed as expeted but only for 1-2 seconds and then colors are reverted back
"Use Windows display calibration" box is ticked.
The display profile application on the site gives me the exact same result.
Also, i'm following this guide https://pcmonitors.info/articles/using- ... n-windows/ for the ICC profile but it doesn't work properly for me.
Whenever I set a new profile with "Set as Default Profile", the monitor colors are changed as expeted but only for 1-2 seconds and then colors are reverted back
"Use Windows display calibration" box is ticked.
The display profile application on the site gives me the exact same result.
- lexlazootin
- Posts: 1251
- Joined: 16 Dec 2014, 02:57
Re: artefacts and weird pixel XL2411z
Yep, don't know what too say about that. I also followed that guide and mine stuck just fine.