Falkentyne wrote:Strobe utility doesn't support monitors with new firmware code. But firmware is the exact same as XL2411Z V004. But Zowie updates this to V005. Please use service menu to make strobe changes. Besides, service menu is more powerful. You can use strobe adjustments with Single Strobe=OFF at 100hz+ refresh rate. Single Strobe On is only required for refresh rates lower than 98 hz. You can also use Strobe Phase =100 if you are *NOT* using Vertical Total tweaks. If you are using VT tweaks, maximum strobe phase will be limited to 100 (60hz), 59 (100hz), 49 (120hz), 46 (125hz), 70 (85hz, VT 1501 only).
Falkentyne, thanks for all your input. I have my Zowie XL2411 hooked up to my Xbox One. I mostly play Halo5 (60fps) on it. If I want to achieve the closest thing to what the blurbuster utility does for clearing the image on it what settings for strobe duty and phase would you recommend? I've set it to single strobe which already looks better. Phase defaults to 100 and Duty defaults to 20. Lowering duty seems to lower the backlight and I can't exactly tell what lowering the phase does.