[FIXED] How Can I get Blur Busters Strobe Utility to work?
[FIXED] How Can I get Blur Busters Strobe Utility to work?
So I just a did a fresh install of Windows 10 (I have a BenQ Xl2411Z), but the monitor in my device manager is now listed as a Zowie monitor, I can't seem to use Blur Busters anymore, even when I try to select a different driver from an old BenQ disc. What can I do?
-
- Posts: 2795
- Joined: 26 Mar 2014, 07:23
Re: How Can I get Blur Busters?
Hi. Please read the forum. This question has been asked and answered multiple times now, including today.
The strobe utility is designed to be used with a VT 1350 (or VT 1500) tweak at 120hz. If you want to use other refresh rates, like 100hz, or DONT want to use a VT tweak at all, you are best off using the service menu so you can use a strobe phase of 100 (lower input lag) or 0 (less crosstalk, up to 1 frame higher input lag).
The windows utility prevents you from going too "high" on the strobe phase when a VT Tweak is used (going too high will shut off the backlight).
The strobe utility is designed to be used with a VT 1350 (or VT 1500) tweak at 120hz. If you want to use other refresh rates, like 100hz, or DONT want to use a VT tweak at all, you are best off using the service menu so you can use a strobe phase of 100 (lower input lag) or 0 (less crosstalk, up to 1 frame higher input lag).
The windows utility prevents you from going too "high" on the strobe phase when a VT Tweak is used (going too high will shut off the backlight).
Re: How Can I get Blur Busters?
I'm using an XL2411Z on 144hz.Falkentyne wrote:Hi. Please read the forum. This question has been asked and answered multiple times now, including today.
The strobe utility is designed to be used with a VT 1350 (or VT 1500) tweak at 120hz. If you want to use other refresh rates, like 100hz, or DONT want to use a VT tweak at all, you are best off using the service menu so you can use a strobe phase of 100 (lower input lag) or 0 (less crosstalk, up to 1 frame higher input lag).
The windows utility prevents you from going too "high" on the strobe phase when a VT Tweak is used (going too high will shut off the backlight).
http://www.blurbusters.com/benq/strobe-utility/
This says it should be compatible, but it says no Xl2411Z monitor is found when I run the utility, because the driver in device manager is listing it as a Zowie monitor even though it isn't
- Chief Blur Buster
- Site Admin
- Posts: 11653
- Joined: 05 Dec 2013, 15:44
- Location: Toronto / Hamilton, Ontario, Canada
- Contact:
Re: [FIXED] How Can I get Blur Busters Strobe Utility to wor
UPDATE!
New Zowie compatible version of Strobe Utility here: http://www.blurbusters.com/strobe-utility
New Zowie compatible version of Strobe Utility here: http://www.blurbusters.com/strobe-utility
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter
Forum Rules wrote: 1. Rule #1: Be Nice. This is published forum rule #1. Even To Newbies & People You Disagree With!
2. Please report rule violations If you see a post that violates forum rules, then report the post.
3. ALWAYS respect indie testers here. See how indies are bootstrapping Blur Busters research!