Re: XL2720z V2 + BB Strobe Utility = Greatest Gaming Monitor
Posted: 11 Oct 2015, 16:18
If you want strobing do NOT get the XL2730Z.
http://forums.blurbusters.com/viewtopic ... 2&start=20
there are serious strobe issues with the firmware, it can not accept VT tweaks to lower crosstalk (crosstalk on XL2730Z, position wise on the screen, is the same as XL2720Z without VT tweaks..and XL2730Z can not strobe in sync with refresh rate lower than 120hz (even 110hz fails). you can emulate XL2730Z screen on XL2720Z by using custom timings on XL2720Z:
2560x1440
front porch 48,3
sync width 32,5
horizontal total 2656
vertical total 1500.
refresh rate 100hz.
Crosstalk is too high.
(note: for 115hz change horizontal total to 2641 and vertical total to 1497. only tested with displayport)..
For blur reduction, XL2720Z is still the best monitor to get, because of AMA low mode that does not exist on 24" XL2420Z, XL2411Z and (I'm not sure about) XL2430T. AMA low can be unlocked by enabling blur reduction, then set or press "back" on AMA setting high, or move AMA slider to off/premium then back to high (works best with contrast 5-15, but less than 20). Its because of AMA low mode setting is the only reason I recommend XL2720Z over the 24" versions.
XL2430T has strange profile bugs and presets. There is a large thread in general section on this monitor. It acts the same as XL2420Z for strobing and crosstalk/VT tweaks but there are strange bugs with the profiles, low level calibrations on some, and gamer 1-3 presets not recalling the color calibrations for the originally saved preset and people having problems getting lagom.nl white/black balance correct. Some returned this screen because of the problems.
http://forums.blurbusters.com/viewtopic ... 2&start=20
there are serious strobe issues with the firmware, it can not accept VT tweaks to lower crosstalk (crosstalk on XL2730Z, position wise on the screen, is the same as XL2720Z without VT tweaks..and XL2730Z can not strobe in sync with refresh rate lower than 120hz (even 110hz fails). you can emulate XL2730Z screen on XL2720Z by using custom timings on XL2720Z:
2560x1440
front porch 48,3
sync width 32,5
horizontal total 2656
vertical total 1500.
refresh rate 100hz.
Crosstalk is too high.
(note: for 115hz change horizontal total to 2641 and vertical total to 1497. only tested with displayport)..
For blur reduction, XL2720Z is still the best monitor to get, because of AMA low mode that does not exist on 24" XL2420Z, XL2411Z and (I'm not sure about) XL2430T. AMA low can be unlocked by enabling blur reduction, then set or press "back" on AMA setting high, or move AMA slider to off/premium then back to high (works best with contrast 5-15, but less than 20). Its because of AMA low mode setting is the only reason I recommend XL2720Z over the 24" versions.
XL2430T has strange profile bugs and presets. There is a large thread in general section on this monitor. It acts the same as XL2420Z for strobing and crosstalk/VT tweaks but there are strange bugs with the profiles, low level calibrations on some, and gamer 1-3 presets not recalling the color calibrations for the originally saved preset and people having problems getting lagom.nl white/black balance correct. Some returned this screen because of the problems.