BenQ XL2720Z only showing 60fps in AlienInvasion Test?
- Chief Blur Buster
- Site Admin
- Posts: 11647
- Joined: 05 Dec 2013, 15:44
- Location: Toronto / Hamilton, Ontario, Canada
- Contact:
Re: BenQ XL2720Z only showing 60fps in AlienInvasion Test?
This usually is the browser itself incorrectly detecting the refresh rate.
See http://www.testufo.com/browser.html for system requirements.
Can you verify that your Windows is not configured into Classic mode?
See http://www.testufo.com/browser.html for system requirements.
Can you verify that your Windows is not configured into Classic mode?
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter
Forum Rules wrote: 1. Rule #1: Be Nice. This is published forum rule #1. Even To Newbies & People You Disagree With!
2. Please report rule violations If you see a post that violates forum rules, then report the post.
3. ALWAYS respect indie testers here. See how indies are bootstrapping Blur Busters research!
Re: BenQ XL2720Z only showing 60fps in AlienInvasion Test?
Hey Chief! Thanks for stopping by and giving me some advice.Chief Blur Buster wrote:This usually is the browser itself incorrectly detecting the refresh rate.
See http://www.testufo.com/browser.html for system requirements.
Can you verify that your Windows is not configured into Classic mode?
I was using Windows Classic mode but enabled an Aeros Window 7 theme and restarted.
I then installed the latest Firefox and Opera browsers and went to www.testufo.com
It still only shows 60fps as with the original chrome browser?
I checked my Nvidia control panel which shows 120fps setting is on.
I checked my Windows control panel display which also shows it should be running at 120fps.
Now I am confused as to what I am running? All 3 browsers show 60fps but my computer settings are 120fps.
Any further advice is appreciated. Thanks again.
Re: BenQ XL2720Z only showing 60fps in AlienInvasion Test?
http://forums.blurbusters.com/viewtopic.php?f=13&t=452
Thanks.
Do you think it was because I used the strobe utility FIRST instead of doing the VT 1350?1920x1080p 120Hz, optimized for clearest motion, but very dim
Sharper & Clearer Than LightBoost=10%, but dimmer
1. First, do the "Vertical Total 1350" Tweak.
2. In Strobe Utility, enable "Override"
3. Set "Persistence" to 0.5ms
4. Set "Crosstalk" to first tick (3 clicks up)
Thanks.