Those who "isolation transformer" did not solve their issue

Separate area for niche lag issues including unexpected causes and/or electromagnetic interference (ECC = retransmits = lag). Interference (EMI, EMF) of all kinds (wired, wireless, external, internal, environment, bad component) can cause error-correction latencies like a bad modem connection. Troubleshooting may require university degree. Your lag issue is likely not EMI. Please read this before entering sub-forum.
Forum rules
IMPORTANT:
This subforum is for advanced users only. This separate area is for niche or unexpected lag issues such as electromagnetic interference (EMI, EMF, electrical, radiofrequency, etc). Interference of all kinds (wired, wireless, external, internal, environment, bad component) can cause error-correction (ECC) latencies like a bad modem connection, except internally in a circuit. ECC = retransmits = lag. Troubleshooting may require university degree. Your lag issue is likely not EMI.
🠚 You Must Read This First Before Submit Post or Submit Reply
Post Reply
amorou
Posts: 106
Joined: 29 Aug 2022, 18:46

Those who "isolation transformer" did not solve their issue

Post by amorou » 18 Jul 2023, 17:56

Which va rating your isolation transformer was , and how much watt your pc was drawing ?

If you have 500va iso.tra. and your pc fraws 100 va , it will reduce less harmonics "i guess" , you want to be close to 500 va.

https://www.youtube.com/watch?v=U36ywxWHIy8

(Also aint with that logic , using monitor at 100 brightness will be better , for pc forget less wattage psu since hard to find low ripple 100 watt psu)

Sqnax17
Posts: 39
Joined: 19 May 2022, 08:59

Re: Those who "isolation transformer" did not solve their issue

Post by Sqnax17 » 18 Jul 2023, 21:42

amorou wrote:
18 Jul 2023, 17:56
Which va rating your isolation transformer was , and how much watt your pc was drawing ?

If you have 500va iso.tra. and your pc fraws 100 va , it will reduce less harmonics "i guess" , you want to be close to 500 va.

https://www.youtube.com/watch?v=U36ywxWHIy8

(Also aint with that logic , using monitor at 100 brightness will be better , for pc forget less wattage psu since hard to find low ripple 100 watt psu)
It doesn't work, I tested it. the transformer improves but does not correct even 50% of the problem

amorou
Posts: 106
Joined: 29 Aug 2022, 18:46

Re: Those who "isolation transformer" did not solve their issue

Post by amorou » 18 Jul 2023, 23:34

Sqnax17 wrote:
18 Jul 2023, 21:42
amorou wrote:
18 Jul 2023, 17:56
Which va rating your isolation transformer was , and how much watt your pc was drawing ?

If you have 500va iso.tra. and your pc fraws 100 va , it will reduce less harmonics "i guess" , you want to be close to 500 va.

https://www.youtube.com/watch?v=U36ywxWHIy8

(Also aint with that logic , using monitor at 100 brightness will be better , for pc forget less wattage psu since hard to find low ripple 100 watt psu)
It doesn't work, I tested it. the transformer improves but does not correct even 50% of the problem
Did you understand what I wrote

triplese
Posts: 130
Joined: 13 Dec 2021, 12:20

Re: Those who "isolation transformer" did not solve their issue

Post by triplese » 19 Jul 2023, 17:23

1000VA, 2 PCs connected - ~700W consumed. Zero effect.

BTW, I'm selling it, if anybody want to play with it.

MegaMelmek
Posts: 242
Joined: 21 Jan 2021, 12:54

Re: Those who "isolation transformer" did not solve their issue

Post by MegaMelmek » 20 Jul 2023, 16:20

3000VA toroid transformer, PC +- 700W. NO improve

amorou
Posts: 106
Joined: 29 Aug 2022, 18:46

Re: Those who "isolation transformer" did not solve their issue

Post by amorou » 22 Jul 2023, 16:20

MegaMelmek wrote:
20 Jul 2023, 16:20
3000VA toroid transformer, PC +- 700W. NO improve
As I said you want 800w transformer for 700w consuming

Post Reply