BenQ xl2411z questions :)

Talk about overclocking displays at a higher refresh rate. This includes homebrew, 165Hz, QNIX, Catleap, Overlord Tempest, SEIKI displays, certain HDTVs, and other overclockable displays.
Post Reply
urut
Posts: 111
Joined: 08 Aug 2014, 13:15

BenQ xl2411z questions :)

Post by urut » 08 Aug 2014, 14:09

Hi. I've got benq xl2411z. I got a couple of question to you guys :D

1. I playing fps games (coutner strike global offensive) and what's the best options in benq settings to get the most advantage ? The best quality and smooth etc? How to see people "faster".

Best ama setting? Insant mode off/on? etc ? :) Can you help me?

2. What is better, 144hz or 120hz with VT1350 trick?
and if 120hz with vt1350 is better than 144hz, now vt1350 is better or vt1502? ;p

And when i using 1502vt trick @ 1920x1080 and playing game with 800x600 its still working or i must create custom resolution 800x600 with 1502vt? Cause when i create 800x600 with 1502vt trick i've got full of artifacts :p

And when i use vt1502 trick at 1024x768 it works, i've got that what i need, full smooth nice quality etc. But i've got message "Incorrect cable, please use dvi dual link" but monitor still works (but i can't go to menu :p) i use dvi dual link ofc ;D
Waiting for response. :)


And when i opened service menu i've got this http://prntscr.com/44pa7e

but without a "Strobe duty", "Strobe phase" and "Single strobe" options.

Need help :p.

kamill
Posts: 30
Joined: 02 Apr 2014, 18:10

Re: BenQ xl2411z questions :)

Post by kamill » 12 Sep 2014, 07:01

144Hz + PWM-free or 120Hz + Benq Blur Reduction + vt trick. IMO 144Hz is the best, because my eyes feel better.
AMA High.
You can't use vt trick on 800x600, only 1920x1080.

Falkentyne
Posts: 2793
Joined: 26 Mar 2014, 07:23

Re: BenQ xl2411z questions :)

Post by Falkentyne » 12 Sep 2014, 17:59

You need to upgrade the monitor firmware to v2. You probably have v1, and you won't have those options in the v1 service menu.

About the incorrect cable:
If you used 1024x768 as a custom resolution in CRU.exe, its a known problem with lower 'detailed/standard resolutions', which cause the monitor to treat them like a 'preset' windows resolution. The VG248QE does the exact same thing and will have the same 'artifacts' appear; example, 1024x768@120hz as a preset will cause the incorrect cable error and I think 1024x768@100 hz will show a line artifact on the right edge. This happens on both the VG248QE and the benq so it MAY be a problem in CRU or with the panel circuitry itself (since they are both made by the same manufacturer).

1280x1024@100 does the same error msg.

urut
Posts: 111
Joined: 08 Aug 2014, 13:15

Re: BenQ xl2411z questions :)

Post by urut » 03 Oct 2014, 20:00

kamill wrote:144Hz + PWM-free or 120Hz + Benq Blur Reduction + vt trick. IMO 144Hz is the best, because my eyes feel better.
AMA High.
You can't use vt trick on 800x600, only 1920x1080.
What is that "PWM-free" ? Sry for posting so long but i read this thread once again now and i see this ;d


urut
Posts: 111
Joined: 08 Aug 2014, 13:15

Re: BenQ xl2411z questions :)

Post by urut » 07 Oct 2014, 13:58

Okay, now he said 144hz + pwm-free ye, can i on/off or change setting of PWM ?

urut
Posts: 111
Joined: 08 Aug 2014, 13:15

Re: BenQ xl2411z questions :)

Post by urut » 08 Oct 2014, 11:39

kamill told me "144hz + pwm-free" how to set that pwm-free? :P

kamill
Posts: 30
Joined: 02 Apr 2014, 18:10

Re: BenQ xl2411z questions :)

Post by kamill » 08 Oct 2014, 12:41

PWM-Free is automaticaly On, so You don't have to do anything, just turn off Blur Reduction :lol:

Post Reply