Benq xl2411z cant get higher than 60hz even with dvi dual
Benq xl2411z cant get higher than 60hz even with dvi dual
Hi, I disassembled my pc to clean it and after I rebuilt it and I've got a problem that my monitor can't reach more than 60hz. I'm sure I'm using dvi dual channel. I reinstalled gpu drivers but it didn't help, I have reset dispay with CRU, nothing. before disassembling I had my 144hz. Now, amd catalyst says that I can get only 120hz on 1024x768 like on vga port, but I'm using dvi d port on my gpu now
Re: Benq xl2411z cant get higher than 60hz even with dvi dua
Try another port. Some cards with multiple DVI ports have a SL-DVI one.
Steam • GitHub • Stack Overflow
The views and opinions expressed in my posts are my own and do not necessarily reflect the official policy or position of Blur Busters.
The views and opinions expressed in my posts are my own and do not necessarily reflect the official policy or position of Blur Busters.
Re: Benq xl2411z cant get higher than 60hz even with dvi dua
The second one is VGA port, even above of this port there's written that it's VGA .RealNC wrote:Try another port. Some cards with multiple DVI ports have a SL-DVI one.
Re: Benq xl2411z cant get higher than 60hz even with dvi dua
My gpu is asus matrix r9 280x
Re: Benq xl2411z cant get higher than 60hz even with dvi dua
I fixed. The problem was in button on gpu that changes between single link and dual link. probably I accidentally changed on disassembling
Re: Benq xl2411z cant get higher than 60hz even with dvi dua
I didn't know AMD makes so funny hardware buttons :]
- lexlazootin
- Posts: 1251
- Joined: 16 Dec 2014, 02:57
Re: Benq xl2411z cant get higher than 60hz even with dvi dua
> button on gpu that changes between single link and dual link
u what mate? that can't be real.
u what mate? that can't be real.
Re: Benq xl2411z cant get higher than 60hz even with dvi dua
it's real. My gpu is Asus rog matrix r9 280x. There's one dvi-i port is connected to displayport, and if you want that this displayport works you should change dvi-i to single link or if you need dual link, just change it with button on gpu, but displayport will not worklexlazootin wrote:> button on gpu that changes between single link and dual link
u what mate? that can't be real.