Search found 11519 matches
- 28 May 2024, 16:43
- Forum: Test UFO Motion Tests
- Topic: Animation Timing Deviation test constant stutters [Fixed after moving computer]
- Replies: 6
- Views: 7996
Re: Animation Timing Deviation test constant stutters [Fixed after moving computer]
Hi I have the same problem. Bought 2 fully new PC:es and still got the same problem with both of them. They had totally different hardware. I suspect it’s windows that is bugging… but are you 100% just by moving your computer to another location solved the problem? Could it possibly be the power ca...
- 28 May 2024, 15:06
- Forum: OLED Displays
- Topic: LG CX vs. RetroTINK-4K BFI - confusing...
- Replies: 7
- Views: 5310
Re: LG CX vs. RetroTINK-4K BFI - confusing...
The goal is to get under 16ms. TINK4K supposedly adds another 2.5ms i've heard as well, at least. Retrotink 4K BFI is lower lag than LG internal BFI. This is because Retrotink 2:1 BFI is fully raster beam-raced based, which means it begins outputting the visible refresh cycle (fastscan 1/120sec) wh...
- 28 May 2024, 14:55
- Forum: News / Rumors / Conventions
- Topic: Acer Nitro XV242F (540hz TN) discussion
- Replies: 32
- Views: 14208
Re: Acer Nitro XV242F (540hz TN) discussion
Hey mate, could you provide some initial impressions. Really keen to purchase but haven't pulled the trigger, feel free to pm also. Thanks!! Hello, You only have 1 post in your records, and PM's only unlock when you have a few posts. This rule change occured because spammers were using PM's to send...
- 28 May 2024, 14:53
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: Did I use VT Tweak correctly? [Benq xl2430t]
- Replies: 1
- Views: 270
Re: Did I use VT Tweak correctly? [Benq xl2430t]
1. Viewing the same mode in both ToastyX CRU and NVIDIA CRU is a good way to confirm. Sometimes one utility adds a mode that doesn't properly save (and not visible in both utilities). So view via at least two Custom Resolution Utilities. 2. Your crosstalk at www.testufo.com/crosstalk should go down ...
- 23 May 2024, 21:52
- Forum: Input Lag / Display Lag / Network Lag
- Topic: AMD Radeon™ Anti-Lag 2
- Replies: 4
- Views: 814
Re: AMD Radeon™ Anti-Lag 2
The best option is to use Radeon Chill + Vsync + FreeSync. I should also add -- if you use VRR in esports -- and want the lowest possible VRR lag -- then ideally make sure you have more refresh rate range than frame rate range. This will minimize compromises of VRR use in esports, as you don't have...
- 23 May 2024, 21:41
- Forum: OLED Displays
- Topic: LG 480hz OLED blurbusters verified spotted?
- Replies: 1
- Views: 507
Re: LG 480hz OLED blurbusters verified spotted?
The licensable Blur Busters Verified logo can be explained at: https://blurbusters.com/new-blur-busters-logo-program-2-2-for-oled-lcd-displays-and-devices/ In short: Gold Verified logo = superlative framerate-based motion blur reduction performance Green Approved logo = superlative strobed or BFI pe...
- 21 May 2024, 21:36
- Forum: General — Displays, Graphics & More
- Topic: ZOWIE XL2566K Discussion Thread [24.5" 360hz TN]
- Replies: 242
- Views: 162954
Re: ZOWIE XL2566K Discussion Thread [24.5" 360hz TN]
Does this monitor has increased input lag if you run it at 240Hz? since some games i play i cant reach 360Hz To avoid confusing framerate and refreshrate 360 fps 360 Hz = Should be fine 240 fps 360 Hz = Should be fine 240 fps 240 Hz = This is where a possible minor lag problem occurs on certain mod...
- 21 May 2024, 21:30
- Forum: OLED Displays
- Topic: AW2725DF flicker - possibly DSC related?
- Replies: 2
- Views: 690
Re: AW2725DF flicker - possibly DSC related?
DSC does not do this type of flicker.
Something else is causing it, such as insufficient capacitoring of a PWM-driven backlight at low brightnesses.
Something else is causing it, such as insufficient capacitoring of a PWM-driven backlight at low brightnesses.
- 21 May 2024, 21:19
- Forum: OLED Displays
- Topic: External BFI Injection -- I am working with Retrotink 4K!
- Replies: 48
- Views: 39917
Re: External BFI Injection -- I am working with Retrotink 4K!
My question is, does it only support dual strobe BFI at 24fps? or both 24 & 30fps? If i pair it with a 65" QD-OLED it's been said that it will drop the motion persistence down from 16ms to 6.94ms(Since the TV is 144hz) for movies & TV, and that the BFI flicker will be roughly the same as it is comp...
- 21 May 2024, 17:05
- Forum: Input Lag / Display Lag / Network Lag
- Topic: Fixed my frame skipping, input lag, mouse on ice issue after 5 years of utter agony
- Replies: 9
- Views: 2835
Re: Fixed my frame skipping, input lag, mouse on ice issue after 5 years of utter agony
but this is specific issue from windows. any removal/change/reinstallation of windows drivers (nic/gpu/chipset) affects the operation of the system. Roughly speaking, any action in the device manager affects how the mouse moves. I think everyone on this forum can confirm this. That is a different t...