Blur Busters Forums

Hi I have the same problem. Bought 2 fully new PC:es and still got the same problem with both of them. They had totally different hardware. I suspect it’s windows that is bugging… but are you 100% just by moving your computer to another location solved the problem? Could it possibly be the power ca...

The goal is to get under 16ms. TINK4K supposedly adds another 2.5ms i've heard as well, at least. Retrotink 4K BFI is lower lag than LG internal BFI. This is because Retrotink 2:1 BFI is fully raster beam-raced based, which means it begins outputting the visible refresh cycle (fastscan 1/120sec) wh...

Hey mate, could you provide some initial impressions. Really keen to purchase but haven't pulled the trigger, feel free to pm also. Thanks!! Hello, You only have 1 post in your records, and PM's only unlock when you have a few posts. This rule change occured because spammers were using PM's to send...

1. Viewing the same mode in both ToastyX CRU and NVIDIA CRU is a good way to confirm. Sometimes one utility adds a mode that doesn't properly save (and not visible in both utilities). So view via at least two Custom Resolution Utilities. 2. Your crosstalk at www.testufo.com/crosstalk should go down ...

The best option is to use Radeon Chill + Vsync + FreeSync. I should also add -- if you use VRR in esports -- and want the lowest possible VRR lag -- then ideally make sure you have more refresh rate range than frame rate range. This will minimize compromises of VRR use in esports, as you don't have...

The licensable Blur Busters Verified logo can be explained at: https://blurbusters.com/new-blur-busters-logo-program-2-2-for-oled-lcd-displays-and-devices/ In short: Gold Verified logo = superlative framerate-based motion blur reduction performance Green Approved logo = superlative strobed or BFI pe...

Does this monitor has increased input lag if you run it at 240Hz? since some games i play i cant reach 360Hz To avoid confusing framerate and refreshrate 360 fps 360 Hz = Should be fine 240 fps 360 Hz = Should be fine 240 fps 240 Hz = This is where a possible minor lag problem occurs on certain mod...

DSC does not do this type of flicker.

Something else is causing it, such as insufficient capacitoring of a PWM-driven backlight at low brightnesses.

My question is, does it only support dual strobe BFI at 24fps? or both 24 & 30fps? If i pair it with a 65" QD-OLED it's been said that it will drop the motion persistence down from 16ms to 6.94ms(Since the TV is 144hz) for movies & TV, and that the BFI flicker will be roughly the same as it is comp...

but this is specific issue from windows. any removal/change/reinstallation of windows drivers (nic/gpu/chipset) affects the operation of the system. Roughly speaking, any action in the device manager affects how the mouse moves. I think everyone on this forum can confirm this. That is a different t...