So I'm having issues now (very minor). My LG 34" monitor flashes occasionally and videos in my FB feed start out with the colors all weird (blacked out silhouettes) which take a few seconds to return to normal.
Is this due to poor CRU settings or my GPU just struggling? I only have a 7950 so I ...
Search found 18 matches
- 27 Aug 2015, 19:32
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: EVERYONE UPDATE TO V4 FIRMWARE IF YOU CAN!! NEW AMA MODE!!!!
- Replies: 78
- Views: 92277
- 30 Jul 2015, 13:00
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: EVERYONE UPDATE TO V4 FIRMWARE IF YOU CAN!! NEW AMA MODE!!!!
- Replies: 78
- Views: 92277
Re: EVERYONE UPDATE TO V4 FIRMWARE IF YOU CAN!! NEW AMA MODE
Ahh yes. My strobe phase was way too high.
It looks much better at 013. I thought based on the examples that I needed to have a higher phase in the 40s.
So for strobe duty, do I just increase it until I reach a brightness that is comfortable? I am seeing little change in persistence with strobe ...
It looks much better at 013. I thought based on the examples that I needed to have a higher phase in the 40s.
So for strobe duty, do I just increase it until I reach a brightness that is comfortable? I am seeing little change in persistence with strobe ...
- 30 Jul 2015, 08:29
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: EVERYONE UPDATE TO V4 FIRMWARE IF YOU CAN!! NEW AMA MODE!!!!
- Replies: 78
- Views: 92277
Re: EVERYONE UPDATE TO V4 FIRMWARE IF YOU CAN!! NEW AMA MODE
CRU adds custom resolutions. The CRU resolutions should appear in AMD CCC, then you just select them.
IF testUFO is showing 144hz then it's 144hz.
Are you selecting 144hz in the AMD CCC? or 120?
Because what you select in CCC will be what is used. You don't "select" resolutions in CRU. They are ...
IF testUFO is showing 144hz then it's 144hz.
Are you selecting 144hz in the AMD CCC? or 120?
Because what you select in CCC will be what is used. You don't "select" resolutions in CRU. They are ...
- 30 Jul 2015, 00:50
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: EVERYONE UPDATE TO V4 FIRMWARE IF YOU CAN!! NEW AMA MODE!!!!
- Replies: 78
- Views: 92277
Re: EVERYONE UPDATE TO V4 FIRMWARE IF YOU CAN!! NEW AMA MODE
Haha yes, I quickly discovered that when I restarted my computer and found that it was out of range again.
So CRU is set to 120 Hz, but the Blur Busters motion test is showing 144 Hz. CRU should override AMD's Catalyst Suite shouldn't it?
I'm getting ghosting just above the middle of the screen ...
So CRU is set to 120 Hz, but the Blur Busters motion test is showing 144 Hz. CRU should override AMD's Catalyst Suite shouldn't it?
I'm getting ghosting just above the middle of the screen ...
- 30 Jul 2015, 00:37
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: EVERYONE UPDATE TO V4 FIRMWARE IF YOU CAN!! NEW AMA MODE!!!!
- Replies: 78
- Views: 92277
Re: EVERYONE UPDATE TO V4 FIRMWARE IF YOU CAN!! NEW AMA MODE
Okay, so I am trying out the strobe duty and phase settings w/ the CRU at your recommended settings (120Hz):
http://i.imgur.com/xWvwnvg.png
At 005 strobe duty and 045 strobe phase, it seems to be quite dark. 006 duty and 044 is probably the lowest I can do, though I have yet to actually try a ...
http://i.imgur.com/xWvwnvg.png
At 005 strobe duty and 045 strobe phase, it seems to be quite dark. 006 duty and 044 is probably the lowest I can do, though I have yet to actually try a ...
- 29 Jul 2015, 20:28
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: EVERYONE UPDATE TO V4 FIRMWARE IF YOU CAN!! NEW AMA MODE!!!!
- Replies: 78
- Views: 92277
Re: EVERYONE UPDATE TO V4 FIRMWARE IF YOU CAN!! NEW AMA MODE
Ahh yes, I just experienced that. Tried to play CSGO and then it said out of range! So if I'm playing at 144 Hz, I should just leave VT alone then? Or am I better off doing 120 Hz and doing the VT? I honestly don't think I can tell a 1 ms input lag difference.
- 29 Jul 2015, 12:35
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: EVERYONE UPDATE TO V4 FIRMWARE IF YOU CAN!! NEW AMA MODE!!!!
- Replies: 78
- Views: 92277
Re: EVERYONE UPDATE TO V4 FIRMWARE IF YOU CAN!! NEW AMA MODE
Thanks.
Are these settings for the BenQ correct for VT1500?

Are these settings for the BenQ correct for VT1500?

- 28 Jul 2015, 23:50
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: EVERYONE UPDATE TO V4 FIRMWARE IF YOU CAN!! NEW AMA MODE!!!!
- Replies: 78
- Views: 92277
Re: EVERYONE UPDATE TO V4 FIRMWARE IF YOU CAN!! NEW AMA MODE
So are you guys still using the Blur Busters Utility w/ V4?
- 26 Jul 2015, 21:08
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: Firmware upgrade using Linux tool, requires no hardware
- Replies: 577
- Views: 817790
Re: Firmware upgrade using Linux tool, requires no hardware
Unfortunately no. I definitely would have done it with a Legacy bios if I had one on hand, but I don't :(
I don't plan on selling the monitor so it really doesn't bother me that much. Plus, I feel most people are using DP over DVI-D anyways unless they want to overclock the monitor.
I didn't quite ...
I don't plan on selling the monitor so it really doesn't bother me that much. Plus, I feel most people are using DP over DVI-D anyways unless they want to overclock the monitor.
I didn't quite ...
- 26 Jul 2015, 21:00
- Forum: BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- Topic: Firmware upgrade using Linux tool, requires no hardware
- Replies: 577
- Views: 817790
Re: Firmware upgrade using Linux tool, requires no hardware
Nope, I ended up using my desktop through my Radeon 7950 (DVI) since I saw you were able to flash with the R9 290X. I have a ASUS UEFI bios.
I've already placed an order for a Mini DP - DP cable (preferred choice anyways since it's much lighter than a DVI cable). I just hate that I have to go two ...
I've already placed an order for a Mini DP - DP cable (preferred choice anyways since it's much lighter than a DVI cable). I just hate that I have to go two ...