Search found 12 matches

by afx7
01 Sep 2019, 02:28
Forum: Input Lag
Topic: Request to test FPS and Standard Benq display mode lag
Replies: 3
Views: 746

Re: Request to test FPS and Standard Benq display mode lag

That's a good point about FPS mode being default mode, more reason to ask why they would chose that over standard for everyone out of the box experience with the monitor
by afx7
30 Aug 2019, 01:07
Forum: Input Lag
Topic: Request to test FPS and Standard Benq display mode lag
Replies: 3
Views: 746

Request to test FPS and Standard Benq display mode lag

There were lag tests of the display modes on a BenQ monitor posted a while back but I cant find the original article again. Im not sure it was even a 144Hz display, but they stated FPS and standard modes had no difference in input lag from measurements. I have had this in mind for quite a while but ...
by afx7
22 Aug 2019, 16:08
Forum: Eliminating Motion Blur — LightBoost / ULMB / ELMB / DyAc
Topic: 240Hz monitor input lag?
Replies: 0
Views: 336

240Hz monitor input lag?

Hi, Ive been using my XL2411Z with blur reduction and AMA disabled because I found it did add a slightly noticeable amount of lag, and I find my CRT still has a slight edge over the LCD. Is it correct the XL2411Z is still among the lowest input lag for an LCD? I was interested in a new 240Hz monitor...
by afx7
20 Nov 2018, 16:10
Forum: BENQ/Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
Topic: Strobe Utility 2.0 BETA Download!
Replies: 29
Views: 24806

Re: Strobe Utility 2.0 BETA Download!

I see some posts from a few years ago that say a later strobe phase of 100 has no input lag where earlier 0 has 1 frame. earliers seems like it would have less lag so im wondering if that was a bug, what settings has zero input lag? 0 or 100? the crosstalk bar is roughly in the same place at 0 and 1...
by afx7
25 Mar 2018, 11:55
Forum: BENQ/Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
Topic: Strobe Utility 2.0 BETA Download!
Replies: 29
Views: 24806

Re: Strobe Utility 2.0 BETA Download!

Really just awesome work! the 2017 version wouldnt detect for me... but now finally have something that can compete with a CRT, in price, fluidity and most importantly dimness
by afx7
24 Nov 2017, 20:02
Forum: BENQ/Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
Topic: Zowie xl2411 utitility detection issues?
Replies: 3
Views: 1304

Re: Zowie xl2411 utitility detection issues?

Chief Blur Buster wrote: Also, Strobe Utility doesn't work if the monitor is in Service/Factory menu mode. Disable that before trying Strobe Utility.
Thanks for reply, how is this done? how do I know which mode im in?
by afx7
23 Nov 2017, 12:48
Forum: BENQ/Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
Topic: Zowie xl2411 utitility detection issues?
Replies: 3
Views: 1304

Zowie xl2411 utitility detection issues?

I got my monitor last week but I cant get the strobe utility to detect it. I tried all the troubleshooting steps except I couldnt ''disable the service menu'', I tried holding button #2 for 5 sec and then powering on, also tried this with button 3 and 5, no service menu showed up . its manufacture d...
by afx7
09 Aug 2016, 09:54
Forum: Eliminating Motion Blur — LightBoost / ULMB / ELMB / DyAc
Topic: backlight strobing on a 60Hz monitor without strobe support?
Replies: 0
Views: 1549

backlight strobing on a 60Hz monitor without strobe support?

Is it possible to enable backlight strobing on a 60Hz monitor that doesnt support it? Im under the impression that any LCD has the hardware capabilities for strobing but of course lacks the firmware/software to support it. If this is the case would it be possible to enable strobing for my BL2420PT a...
by afx7
24 Jul 2016, 06:16
Forum: Display Overclocking
Topic: Benq BL2420PT overclockability?
Replies: 3
Views: 3356

Re: Benq BL2420PT overclockability?

Seriously your monitor might be 6bit also. But yea, just overclock it. Most Benq 60hz can reach 75-80 before they complain. I double checked this and Benq has 8 bit and 16.7 million colours listed in the official specs. Dell conveniently only has '16.7 million colours' listed and it was a review th...
by afx7
23 Jul 2016, 14:30
Forum: Display Overclocking
Topic: Benq BL2420PT overclockability?
Replies: 3
Views: 3356

Benq BL2420PT overclockability?

searched the net and found no info about overclocking this monitor, its a 1440p 60Hz IPS for those who dont know. I decided to buy this over the Dell P2416D because shockingly the dell is only 6 bit dithered the monitors are otherwise identical in specs and price. the Dell however has reports of ach...