Search found 20 matches

by rrisk93
24 Feb 2024, 01:21
Forum: Eliminating Motion Blur — LightBoost / ULMB / ELMB / DyAc
Topic: Results are in Zowie XL2546X DYAC 2 runs perfect at 240HZ UFO Invasion test 0 blur with almost 0 cross talk 100% Screen
Replies: 6
Views: 1664

Re: Results are in Zowie XL2546X DYAC 2 runs perfect at 240HZ UFO Invasion test 0 blur with almost 0 cross talk 100% Scr

Sadly, The only way to fix "bad crosstalk at 120hz" is to update the Blur Buster strobe Utility.... What makes Dyac special is that it is the only strobing technique that maintains over 350 nits. Especially at 2546k. However, I was disappointed because the brightness went down a lot at 2566k. I wond...
by rrisk93
07 Apr 2023, 04:13
Forum: Eliminating Motion Blur — LightBoost / ULMB / ELMB / DyAc
Topic: XL2546K gets even brighter with strobe utility. normal?
Replies: 3
Views: 1557

Re: XL2546K gets even brighter with strobe utility. normal?

By default, XL2546K uses a rather severely voltage-boosted strobe backlight (overvoltage trick). While this was not the intended purpose of Strobe Utility, so some pulse widths may create a slightly-brighter-than-factory strobe backlight mode on some models (e.g. XL2720Z version 2 firmwares had thi...
by rrisk93
06 Apr 2023, 21:33
Forum: Eliminating Motion Blur — LightBoost / ULMB / ELMB / DyAc
Topic: XL2546K gets even brighter with strobe utility. normal?
Replies: 3
Views: 1557

XL2546K gets even brighter with strobe utility. normal?

My Zowie XL2546K gets even brighter with Blur Busters strobe utility. It is like this : 100% monitor brightness without Dyac+ → 350nit 100% monitor brightness with Dyac+ → 350nit Max out brightness with strobe utility → 400nit I can get even bright screen than default 100% brightness! Good to have t...
by rrisk93
08 May 2022, 01:56
Forum: General — Displays, Graphics & More
Topic: [EVE 4K 144Hz Spectrum] Blur Busters Strobe Tuning! (KSF but better than plasma, has 50Hz+60Hz single strobe)
Replies: 11
Views: 7024

Re: [EVE 4K 144Hz Spectrum] Blur Busters Strobe Tuning! (KSF but better than plasma, has 50Hz+60Hz single strobe)

I like EVE 4k 144hz monitor so much, but I realized that brightness is bit low at short pulse width setting. I wonder I could get both "sharpest image" (short pulse width) and "no brightness loss" for EVE monitor. Is it possible to apply the voltage boosted backlight technology to future EVE monitors?
by rrisk93
30 Apr 2022, 15:51
Forum: Eliminating Motion Blur — LightBoost / ULMB / ELMB / DyAc
Topic: DyAc+ is only one that has both brightness and clarity...why?
Replies: 1
Views: 2297

DyAc+ is only one that has both brightness and clarity...why?

The BFI tech is more effective when you play low framerate like 120hz or 144hz (≒ high resolution gaming), rather than 240hz or more. Normally, when we use BFI, we have to choose. If you want brightness, you lose clarity. If you want clarity, you lose brightness. Only DyAc+ can give you both. Gaming...
by rrisk93
24 Nov 2020, 00:17
Forum: Eliminating Motion Blur — LightBoost / ULMB / ELMB / DyAc
Topic: Now I can tell what will be the best anti-blur monitor.
Replies: 3
Views: 2884

Re: Now I can tell what will be the best anti-blur monitor.

OLED is amazing, raw GtG is lightning fast (no need overdrive), almost instant like old good CRT monitors. Maybe OLED is better at clarity, but the problem is the brightness... For now, there is no way that you get both 1ms and over 300nit brightness at the same time... As far as I know, there is o...
by rrisk93
22 Nov 2020, 14:53
Forum: Eliminating Motion Blur — LightBoost / ULMB / ELMB / DyAc
Topic: Now I can tell what will be the best anti-blur monitor.
Replies: 3
Views: 2884

Now I can tell what will be the best anti-blur monitor.

I got xl2546k last week and had fun with it. I also realized some fun facts about backlight strobing. 1. 144hz and 240hz WITHOUT BLS are very different. 2. But there is NO difference between 144hz and 240hz when BLS is on. 3. Screen resolution Matters even if BLS is on. 1080p is so blurry even when ...
by rrisk93
08 Jul 2020, 17:02
Forum: Eliminating Motion Blur — LightBoost / ULMB / ELMB / DyAc
Topic: Viewsonic XG270 with 'PureXP" MBR [pre-tuned by Blur Busters!]
Replies: 754
Views: 529674

Re: Viewsonic XG270 with 'PureXP" MBR [pre-tuned by Blur Busters!]

In the recent Digital Foundry video they reviewed a Viewsonic monitor that was 1440p and mentioned it had PureXP. I'm not sure if its the same as this monitor though. https://www.youtube.com/watch?v=WM9v6klj_7E&t=0s Oh, this monitor have curved VA panel launched at 2020/5/20. It looks great, but is...
by rrisk93
08 Jul 2020, 04:55
Forum: Eliminating Motion Blur — LightBoost / ULMB / ELMB / DyAc
Topic: Viewsonic XG270 with 'PureXP" MBR [pre-tuned by Blur Busters!]
Replies: 754
Views: 529674

Re: Viewsonic XG270 with 'PureXP" MBR [pre-tuned by Blur Busters!]

Is there any chance i can get 1440p gaming monitor with blur busters approved in this year??