It's normal for the sync track to be retained temporarily if you've had it running long enough.DarioFubar wrote: ↑15 Nov 2023, 12:20My question is now is this normal for this specific model and can anyone else who owns it confirm this or is this a defect and should i RMA it and get a replacement?
Search found 17 matches
- 16 Nov 2023, 00:09
- Forum: General — Displays, Graphics & More
- Topic: Asus PG27AQN Image retention issue, is this normal?
- Replies: 12
- Views: 2499
Re: Asus PG27AQN Image retention issue, is this normal?
- 15 Nov 2023, 05:17
- Forum: General — Displays, Graphics & More
- Topic: AW2523HF 360Hz cursor skipping
- Replies: 6
- Views: 2548
Re: AW2523HF 360Hz
I don't see a reason for the iGPU to use anything other than the EDID resolution, it's on AMD to fix it (they won't).
- 14 Nov 2023, 23:35
- Forum: General — Displays, Graphics & More
- Topic: AW2523HF 360Hz cursor skipping
- Replies: 6
- Views: 2548
Re: AW2523HF 360Hz
Is there a program that shows the current timings? CRU only shows EDID timings, but it doesn't even show the extension blocks when on the iGPU.
- 12 Nov 2023, 09:25
- Forum: General — Displays, Graphics & More
- Topic: AW2523HF 360Hz cursor skipping
- Replies: 6
- Views: 2548
Re: AW2523HF 360Hz
I appreciate the response but unfortunately that isn't a viable solution since it's already a 100MHz difference from 360Hz to 300Hz and it still happens at 300Hz unless I restart the display, only for it to come back after the the GPU driver restarts. The monitor seems ok apart from the amd-related ...
- 11 Nov 2023, 22:21
- Forum: General — Displays, Graphics & More
- Topic: AW2523HF 360Hz cursor skipping
- Replies: 6
- Views: 2548
AW2523HF 360Hz cursor skipping
Hello, I decided to try the AW2523HF. However, I've had many issues with it since I have a radeon GPU. The first issue I've had and somewhat managed to resolve was the refresh rate was stuck at 30Hz, unless I created a dword: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E968-E325-1...
- 22 Apr 2023, 00:58
- Forum: Input Lag / Display Lag / Network Lag
- Topic: Couldn't find out which USB ports are the CPUs & which are the Chipset's
- Replies: 24
- Views: 15533
Re: Couldn't find out which USB ports are the CPUs & which are the Chipset's
Big fan of your guide here Calypto <3, Is it correct now? The one on the top says the Chipset, where I have the Keyboard plugged in, Taking High polling rate device should be seperated to avoid freq. interference in account. and the one in the lower, is the CPU USB Ports, Also Port1 seems to be the...
- 15 Apr 2023, 15:14
- Forum: Input Lag / Display Lag / Network Lag
- Topic: Couldn't find out which USB ports are the CPUs & which are the Chipset's
- Replies: 24
- Views: 15533
- 15 Apr 2023, 12:29
- Forum: Input Lag / Display Lag / Network Lag
- Topic: Couldn't find out which USB ports are the CPUs & which are the Chipset's
- Replies: 24
- Views: 15533
Re: Couldn't find out which USB ports are the CPUs & which are the Chipset's
You can easily verify the port by going into hwinfo main window→bus→check which controller is which; with Zen it will show the CPU and chipset controllers separately.
- 19 Jun 2020, 06:02
- Forum: Niche Issues Affecting Latency — Electrical, Interference, EMI, Unexpected Causes, etc.
- Topic: [Power/EMI] I discover why sometime PC become fast and low input lag and otherwise feel high input lag
- Replies: 1117
- Views: 692723
Re: [Power/EMI] I discover why sometime PC become fast and low input lag and otherwise feel high input lag
Very interesting -- if you see this happen again, catch some more samples, and try to YouTube-capture at a higher resolution. The YouTube compression makes it a bit hard to see the stutter, but I see the frametime graphs go messy simultaneously with dirty power. Mind you, I wish there was a lot mor...
- 17 Jun 2020, 15:49
- Forum: Niche Issues Affecting Latency — Electrical, Interference, EMI, Unexpected Causes, etc.
- Topic: [Power/EMI] I discover why sometime PC become fast and low input lag and otherwise feel high input lag
- Replies: 1117
- Views: 692723