Search found 2607 matches

by Falkentyne
07 Nov 2020, 17:14
Forum: General — Displays, Graphics & More
Topic: Thinking about new monitor due to RTX 3080
Replies: 15
Views: 1920

Re: Thinking about new monitor due to RTX 3080

So basically I finally received my RTX 3080 but I still doesnt have stable 240 fps in Warzone, and this is not what I wanted. I have around 200 fps vs 160 fps before on my 1080Ti. Yes on Multiplayer (not in Warzone) I have 250-300 fps but still I think I should get other monitor, so Im thinking abo...
by Falkentyne
07 Nov 2020, 16:53
Forum: General — Displays, Graphics & More
Topic: BENQ Zowie XL2746S & XL2546S (*DISCONTINUED*) Owners Thread
Replies: 530
Views: 112235

Re: BENQ Zowie XL2746S & XL2546S (*DISCONTINUED*) Owners Thread

The single strobe cutoff point is between 75hz and 96hz. I am not sure where, since I don't own this monitor yet (it's just too expensive). On the Benq XL2720Z, it was exactly 96hz (via custom refresh rates) where it started double strobing if "Single Strobe" was set to disabled in the service menu....
by Falkentyne
31 Oct 2020, 19:34
Forum: Eliminating Motion Blur — LightBoost / ULMB / ELMB / DyAc
Topic: Good News Everyone: 60Hz Single Strobe Options
Replies: 50
Views: 5011

Re: Good News Everyone: 60Hz Single Strobe Options

This is great news. I'll be looking for that 1440p 240hz monitor. That will make my RTX 3090 FE *and* emulators very happy!
by Falkentyne
27 Oct 2020, 19:58
Forum: General — Displays, Graphics & More
Topic: BenQ Zowie XL2546K 240hz TN
Replies: 129
Views: 16453

Re: BenQ Zowie XL2546K 240hz TN

Rtings purchased the XL2546k yesterday (together with the PG259QN), it's a matter of time before they review the two units. Edit: There's a new review with ufotest pictures https://www.youtube.com/watch?v=A2c4KQ-0m_Q That 60hz is double strobing. You can tell by the extra number of UFO images behin...
by Falkentyne
26 Oct 2020, 17:18
Forum: Display Overclocking
Topic: BenQ XL2720Z overclocked to 220Hz and 250Hz [SUCCESS!]
Replies: 50
Views: 30288

Re: BenQ XL2720Z overclocked to 220Hz and 250Hz [SUCCESS!]

I haven't tested higher than 165hz because 6 BPC looks like total garbage. I keep reading about 6 BPC and 8 BPC but it looks exactly the same at 144 Hz and 222 Hz. Here are photos: https://i.imgur.com/tNomivU.jpg https://i.imgur.com/c6e5wS3.jpg They look exactly the same on camera and for my eyes. ...
by Falkentyne
17 Oct 2020, 19:29
Forum: Display Overclocking
Topic: BenQ UNIVERSAL 144Hz->220Hz OVERCLOCK for 1080p 144 Hz
Replies: 373
Views: 154001

Re: BenQ UNIVERSAL 144Hz->220Hz OVERCLOCK for 1080p 144 Hz

Adding this here since this thread is way more active. --------- I haven't tested higher than 165hz because 6 BPC looks like total garbage. In overwatch it's very obvious what happens to the color banding. Might be ok in some FPS games (you get the same issue with 125hz with a VT 1497-VT 1502 tweak ...
by Falkentyne
17 Oct 2020, 16:51
Forum: Display Overclocking
Topic: BenQ XL2720Z overclocked to 220Hz and 250Hz [SUCCESS!]
Replies: 50
Views: 30288

Re: BenQ XL2720Z overclocked to 220Hz and 250Hz [SUCCESS!]

Is it 250 Hz at 1080p? With what settings exactly did you manage to run it at 250 Hz? Yes. I'm really not sure how. I'm using a DisplayPort cable and NVIDIA graphics card. What could different to your setup is I'm using Zowie V008 firmware and Zowie XL display driver (BENQ display driver makes no d...
by Falkentyne
16 Oct 2020, 22:09
Forum: General — Displays, Graphics & More
Topic: XL2411Z alternative with DP?
Replies: 6
Views: 585

Re: XL2411Z alternative with DP?

Inversion artifacts may be able to be reduced or improved by changing the "sharpness" setting in the monitor. This may not be to everyone's liking and I do not know if that helps on the 24" panels. It does on the XL2720Z. I have no idea if the true 8 bit (not 6 bit + FRC) Benq monitors are affected ...
by Falkentyne
16 Oct 2020, 22:04
Forum: BENQ/Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
Topic: Benq Service+Factory Menus, VT info, AMA Low tweak
Replies: 47
Views: 95766

Re: Benq Service+Factory Menus, VT info, AMA Low tweak

Unfortunately, for 120hz VT 1500 tweak while staying under 360 mhz pixel clock, the AMD stable settings cause frameskipping on Nvidia hardware. (Pixel clock >359.99 mhz causes 6 bit color from the monitor, which you don't want). AMD settings (Vega 64, R9 290X, but 5700 XT is untested): 120hz, 1920x1...
by Falkentyne
12 Oct 2020, 23:42
Forum: General — Displays, Graphics & More
Topic: BENQ Zowie XL2746S & XL2546S (*DISCONTINUED*) Owners Thread
Replies: 530
Views: 112235

Re: BENQ Zowie XL2746S & XL2546S (*DISCONTINUED*) Owners Thread

Wow this thread died. Can someone with an XL2746S (XL2546S will work also) please see if you can create a monitor scaled (display scalar) 1440p resolution ? Use ToastyX CRU and create a resolution with these parameters: H: 2560 V: 1440 Refresh rate (100, 120 or 144hz) Horizontal total: 2720 Vertical...