Search found 146 matches
- 25 Apr 2015, 22:25
- Forum: Display Overclocking
- Topic: Anyone OC a newer Visio M series?
- Replies: 2
- Views: 4729
Re: Anyone OC a newer Visio M series?
I'm looking to buy a visio m and was wondering if anyone had any luck with it. I basically just need a nice big tv with a decent picture that can handle 120hz piped into it from my PC and would rather not drop a grand on something like a visio p. Also, I was lead to believe that hdmi (sub 2.0) does...
- 29 Jan 2015, 23:57
- Forum: Display Overclocking
- Topic: Vizio p552ui-b2 1080p 120hz works!... but not quite
- Replies: 4
- Views: 6027
Re: Vizio p552ui-b2 1080p 120hz works!... but not quite
try using standard porches of Vertical Total 1125 (HDTV standard), and making sure Horizontal Scan Rate is 135HKhz (1080i/60 is 33.75KHz, and 1080p/60 is 67.5Khz, and 1080p 3D at 60/60 is 135KHz) -- that represents number of scanlines output per second. Ok so I made sure vertical total was 1125, i ...
- 27 Aug 2014, 11:31
- Forum: General — Displays, Graphics & More
- Topic: HELP! I need to know the default 1080p 23.976 setting in CRU
- Replies: 9
- Views: 7049
Re: HELP! I need to know the default 1080p 23.976 setting in
Has to be a firmware issue. I created multiple timings of 720p, 1600x900, and 2560x1440 at 23.976 and they all stutter.
- 26 Aug 2014, 18:32
- Forum: General — Displays, Graphics & More
- Topic: HELP! I need to know the default 1080p 23.976 setting in CRU
- Replies: 9
- Views: 7049
Re: HELP! I need to know the default 1080p 23.976 setting in
Maybe try a 47.952 mode instead. That's what I'm using on my monitor. Also, maybe it's the playback software's fault. Did you change any settings in it, or updated it and the new version is buggy? Just tried 47.952 and, while it is less prevalent, it is still stuttering. Also there is no apparent w...
- 26 Aug 2014, 12:24
- Forum: General — Displays, Graphics & More
- Topic: HELP! I need to know the default 1080p 23.976 setting in CRU
- Replies: 9
- Views: 7049
Re: HELP! I need to know the default 1080p 23.976 setting in
I'll give it a shot and report back. And I've tried several and its the same with all.RealNC wrote:Maybe try a 47.952 mode instead. That's what I'm using on my monitor.
Also, maybe it's the playback software's fault. Did you change any settings in it, or updated it and the new version is buggy?
- 26 Aug 2014, 11:45
- Forum: General — Displays, Graphics & More
- Topic: HELP! I need to know the default 1080p 23.976 setting in CRU
- Replies: 9
- Views: 7049
Re: HELP! I need to know the default 1080p 23.976 setting in
Vizio M651d-A2RChief Blur Buster wrote:Firmware update of which display? It *could* actually be a firmware bug.
I'm willing to bet it is, not sure how I didn't notice it for several weeks though?
- 26 Aug 2014, 01:24
- Forum: General — Displays, Graphics & More
- Topic: HELP! I need to know the default 1080p 23.976 setting in CRU
- Replies: 9
- Views: 7049
Re: HELP! I need to know the default 1080p 23.976 setting in
Did you change graphics drivers? Not before the problem started. Only inf's and have since used old back-up versions that I know worked previously. Are you sure the microstutter isn't being caused by the graphics driver and driver settings? Not 100% sure. Updated and it was exactly the same with bo...
- 22 Aug 2014, 21:30
- Forum: General — Displays, Graphics & More
- Topic: HELP! I need to know the default 1080p 23.976 setting in CRU
- Replies: 9
- Views: 7049
Re: HELP! I need to know the default 1080p 23.976 setting in
I've tried 1125 Total but its micro-stuttering, so I made this one to make sure the actual vertical refresh shows 23.976 too and its doing the same. Both show as 1920x1080 on the input info box rather than 1080p which is what it should show. Any thoughts? The set's firmware updated in July, but I've...
- 22 Aug 2014, 21:00
- Forum: General — Displays, Graphics & More
- Topic: HELP! I need to know the default 1080p 23.976 setting in CRU
- Replies: 9
- Views: 7049
HELP! I need to know the default 1080p 23.976 setting in CRU
I edited my current inf and lost the 23.976 option in the process so now I need to recreate it. But in doing so with NCP so far it seems to be micro-stuttering when I watch 23.976 content. It never did this before. Pretty sure I've set something wrong in CRU. So I need to know the default horizontal...
- 22 Aug 2014, 20:38
- Forum: General — Displays, Graphics & More
- Topic: Need opinion on upgrading TV PC display to an actual gaming
- Replies: 2
- Views: 2948
Re: Need opinion on upgrading TV PC display to an actual gam
Check out these if you're interested in gaming at 120hz or strobed from your couch. http://forums.blurbusters.com/viewtopic.php?f=8&t=74&start=40 http://www.blurbusters.com/overclock/120hz-pc-to-tv/ The Sony 4K sets with motionflow impulse accept 120hz and strobe too if you're interested in spending...