Blur Busters Forums

UHD30 also has 240hz, did anyone take comparitive testufo shots of this one as well? https://www.youtube.com/watch?v=poVxiPTJrW0

It's such a shame in "game mode" you cant do any keystone adjustments..

BTW I did mention this earlier but I think every single person ignored me or missed it. if you are using any "out of range" refresh rate (I'm not sure if this works if someone tries to use 144hz with a "high" Vertical total like 1350, for trying to reduce 144hz crosstalk, if anyone wants to try, go...

Whenever you even open the OSD, the monitor will check the signal and see that it's out of range and won't like it (It's in the firmware so you can't do anything about it). There's no graceful way around this problem. You can get the AMA Low to stick with blur reduction off (if you did it with MBR ...

hello, I overclocked my benq xl2411 to 240Hz, but the problem is that only half of the screen is normal, on the other side there are small artifacts and the text becomes unreadable. Has anyone faced the same problem? I think this can be fixed because that one half of the screen is working fine. You...

hello, I overclocked my benq xl2411 to 240Hz, but the problem is that only half of the screen is normal, on the other side there are small artifacts and the text becomes unreadable. Has anyone faced the same problem? I think this can be fixed because that one half of the screen is working fine. You...

A question about the 1920x1079 trick btw: doesn't doing this cause the resolution to be scaled improperly on the monitor? Scaling can be disabled with the 1920x1079 trick; it just leaves 1 pixel row black. Good tip too. The Preferred trick also works, too, albiet NVIDIA specific. As for the AMA bei...

Ah, understood about the DP limitation, i just started reading into those and their pixel clock limits for 1.1 1.2 and 1.3, interesting stuff. Also your 165hz timing worked perfectly! thank you! I also used your 250hz timing and 240hz timings sucessfully for a proper 1080p 240hz and 250hz refresh ra...

Today I tried again with firmware 007 and after there was an error message for the first time I started the flash again straight away and lo and behold, it worked and I'm now on FW 007. You don't have to understand why it is 10x not working and then suddenly it works. I really didn't do anything di...

I think those were on the AMD video card, right? My RTX 3090 FE stutters at those timings :( I had to use other timings. 1920, 1080 24, 3 32, 5 4, 6 60, 14 HT: 1980, VT: 1094 Refresh: 165.000 hz horizontal: 180.510 khz Pixel clock: 357.41 mhz These were the only timings I could get 165hz to never s...

144hz uses a reduced vertical total (VT), which I think is 1094 or something. You can increase the VT via a custom resolution but it will go out of range. You can try using the "S-switch" bypass, or the software tool black screen workaround (for the 165hz-240hz overclock tweaks) in the display over...