Blur Busters Forums

so what is better ? xl2411z/t or lg ?? The LG is better, if you can live with the higher input lag and, as Falkentyne said, leave the color-related settings in the monitor as is (factory preset) - do it in the PC if you really need to. Although I haven't tested this systematically, the LG might hav...

At a glance: The LG24GM77 has the same scaler and panel as the BenQ 2411T/Z, ASUS VG248QE etc., so it is not native 8bit as sometimes reported, BUT... Apparently, the LG 24GM77 does not apply dithering at the scaler level, which normally means increased round-off errors when passing the gamma- and c...

Strobemaster, Since we're on this topic (and I also know you have an XL2730Z), do you know why both the Asus ROG Swift PG278Q and (sometimes) the Benq XL2730Z suffered from excessive inversion artifacts? [...] Not exactly the topic here, but anyway. In my experience, especially with the EIZO Foris ...

I don't understand the last part of your sentence though. Are you saying the LG minimizes round off noise caused by pixel value processing? Or the Asus/Benq do? How does this affect image quality (especially on very dark or white shades, or shades on top of shades (e.g. transparent fogging / clouds...

I do know that the LG 24GM77 uses a true 8 bit panel. Just for the record, the LG-24GM77 sitting on my table has an AUO M240HW01-V8 panel, the same as in other 144Hz 24" monitors (BenQ XL2411Z, Asus VG248QE,...). So it is just 6bit+FRC (see also Panelook ). Nevertheless, the LG-24GM77 uses a differ...

Hi Falkentyne, So far I have run just a few tests with MBR=Off and AMA=High, and at least in this mode the OD setting allows for a very fine control over the strength of AMA (overdrive). This would already be very useful for me, but obviously only if I can figure out how to save the new setting. I'l...

So the settings in the factory menu can be changed (I am after the OD setting for the XL2730Z), but is there a way to actually save the settings so that they will survive power off/on?

mike.lwrnc, you might want to check out this review: http://display-corner.epfl.ch/index.php/BenQ_XL2411Z.
It is still work in progress though.