Blur Busters Forums

Who you gonna call? The Blur Busters! For Everything Better Than 60Hz™ Skip to content

AMA on XL2546

Adjusting BENQ Blur Reduction and DyAc (Dynamic Acceleration) including Blur Busters Strobe Utility. Supports most BenQ/Zowie Z-Series monitors (XL2411, XL2420, XL2720, XL2735, XL2540, XL2546)

AMA on XL2546

Postby MagneticDev » 16 May 2018, 07:03

Hi,
I have two Benq monitor, the xl2411z and xl2546.
When I turn on the blur reduction on my 2411, after using strobe utility, the image is completely clear at 144hz.
I try to get a clear image with the 2546 at 240hz but the best image I can get is this (same problem at 144-120hz):

VideoCapture_20180511-173007.jpg
VideoCapture_20180511-173007.jpg (210.34 KiB) Viewed 341 times


Someone can help me?
MagneticDev
 
Posts: 2
Joined: 16 May 2018, 06:36

Re: AMA on XL2546

Postby Chief Blur Buster » 16 May 2018, 23:25

MagneticDev wrote:Hi,
I have two Benq monitor, the xl2411z and xl2546.
When I turn on the blur reduction on my 2411, after using strobe utility, the image is completely clear at 144hz.
I try to get a clear image with the 2546 at 240hz but the best image I can get is this (same problem at 144-120hz):

VideoCapture_20180511-173007.jpg


Someone can help me?

The higher the Hz, the less time to fit LCD pixel response between refresh cycles:
The smaller the vertical total, the less time to fit LCD pixel response between refresh cycles:
Image
-- You can thin the crosstalk zones by using bigger Vertical Totals and/or lower Hz (maximal benefits occurs when you do both simultaneously).

I suggest lowering your refresh rate to roughly 180-182Hz to create more time between refresh cycles:
Image

For other custom refresh rates, try Appendix A of Advanced Crosstalk FAQ.
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter!
To support Blur Busters: Official List of Best Gaming Monitors | G-SYNC | FreeSync | Ultrawide
User avatar
Chief Blur Buster
Site Admin
 
Posts: 4870
Joined: 05 Dec 2013, 15:44


Return to BENQ/Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc

Who is online

Users browsing this forum: No registered users and 6 guests