xl2411z to V4?[V4 download link & flash instructions]

Adjusting BENQ Blur Reduction and DyAc (Dynamic Acceleration) including Blur Busters Strobe Utility. Supports most BenQ/Zowie Z-Series monitors (XL2411, XL2420, XL2720, XL2735, XL2540, XL2546)
Falkentyne
Posts: 2793
Joined: 26 Mar 2014, 07:23

Re: xl2411z to V4?[V4 download link & flash instructions]

Post by Falkentyne » 16 Mar 2016, 12:22

Turn the settings burn-in to off in the factory menu that appeared.

Edgarchik
Posts: 13
Joined: 27 Dec 2014, 09:42

Re: xl2411z to V4?[V4 download link & flash instructions]

Post by Edgarchik » 16 Mar 2016, 12:28

Falkentyne wrote:Turn the settings burn-in to off in the factory menu that appeared.
yeah thank you =) just fixed it right before you answer
but still have issue
Everytime I turn off->on monitor I have to re set my ama settings high->off->high because its fucking up each time I turn off monitor
is it intended or it can be fixed somehow?

Piaer
Posts: 1
Joined: 29 May 2016, 17:32

Re: xl2411z to V4?[V4 download link & flash instructions]

Post by Piaer » 29 May 2016, 17:33

Thanks for instructions.

Worked perfectly on my PC. MSI GTX 960 by DVI port. Was upgrading from V3.

Note: My bus was 0 - so don't forget to change it for the flashing process (tutorial omits that at the end)

User avatar
Lagahan
Posts: 9
Joined: 27 Dec 2014, 07:30
Location: Ireland

Re: xl2411z to V4?[V4 download link & flash instructions]

Post by Lagahan » 03 Apr 2017, 11:56

Looks like the svn is down at flashrom; "Can't connect to host 'flashrom.org': Network is unreachable"

Any ideas on how to proceed? I wan't to go from V3 to V4 on my 2411z using the guide.

EDIT: MY BAD: this post fixes the issue: viewtopic.php?f=13&t=779&start=440#p24110

EDIT 2: Done! Works perfectly, had to use i2c bus 0 on my old laptop that has a VGA port attached to a Quadro NVS 320 and had to use the different flashrom url but it was done quite quickly then in the end up. Crazy how you can do stuff like this with Linux, I don't use it often myself. Saves us from having to get a hardware solution!

User avatar
Chief Blur Buster
Site Admin
Posts: 11647
Joined: 05 Dec 2013, 15:44
Location: Toronto / Hamilton, Ontario, Canada
Contact:

Re: xl2411z to V4?[V4 download link & flash instructions]

Post by Chief Blur Buster » 03 Apr 2017, 22:00

Lagahan wrote:EDIT 2: Done! Works perfectly, had to use i2c bus 0 on my old laptop that has a VGA port attached to a Quadro NVS 320 and had to use the different flashrom url but it was done quite quickly then in the end up. Crazy how you can do stuff like this with Linux, I don't use it often myself. Saves us from having to get a hardware solution!
Glad it is working now!
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter

Image
Forum Rules wrote:  1. Rule #1: Be Nice. This is published forum rule #1. Even To Newbies & People You Disagree With!
  2. Please report rule violations If you see a post that violates forum rules, then report the post.
  3. ALWAYS respect indie testers here. See how indies are bootstrapping Blur Busters research!

davidm71
Posts: 39
Joined: 28 Jan 2019, 22:48

Re: xl2411z to V4?[V4 download link & flash instructions]

Post by davidm71 » 02 Feb 2019, 15:32

Hey guys,

Anyone have a copy of the first flash chip on the XL2411Z? I messed up taking a backup and dont have one. If anyone could take a dump of it and share it you would be doing me a solid.

Thank you

I need #1:

#1: Found Macronix flash chip "MX25L1605" (2048 kB, SPI) on mstarddc_spi.
#2: Found Macronix flash chip "MX25L1605A/MX25L1606E" (2048 kB, SPI) on mstarddc_spi.

shaca
Posts: 38
Joined: 09 Apr 2015, 15:07

Re: xl2411z to V4?[V4 download link & flash instructions]

Post by shaca » 16 Mar 2019, 10:38

hello

is there a noob way to do this?

Post Reply