Blur Busters Forums

Who you gonna call? The Blur Busters! For Everything Better Than 60Hz™ Skip to content

Benq Service+Factory Menus, VT info, AMA Low tweak

Adjusting BENQ Blur Reduction and DyAc (Dynamic Acceleration) including Blur Busters Strobe Utility. Supports most BenQ/Zowie Z-Series monitors (XL2411, XL2420, XL2720, XL2735, XL2540, XL2546)

Re: Benq Service+Factory Menus, VT info, AMA Low tweak

Postby dnihilist » 10 Apr 2017, 20:46

Thanks for the explanation.
dnihilist
 
Posts: 2
Joined: 10 Apr 2017, 06:40

Re: Benq Service+Factory Menus, VT info, AMA Low tweak

Postby jmcsmfpc » 28 Dec 2017, 19:20

Does anyone know how ama low compares to the asus vg248qe with his overdrive at 60?
jmcsmfpc
 
Posts: 3
Joined: 07 May 2017, 21:32

Re: Benq Service+Factory Menus, VT info, AMA Low tweak

Postby Falkentyne » 03 Jan 2018, 17:10

Benq with "AMA low" is not as good as VG248QE at all (assuming Lightboost mode), or with VG248QE Lightboost mode (after monitor has warmed up for 1 hour).

Benq XL2420Z, XL2411Z and XL2430T=slightly worse than VG248QE if you set contrast to 25 and use AMA low (slight inverse ghosting).

Benq XL2720Z: a bit more worse than VG248QE if you set contrast to 10-15 and use AMA low (slight NORMAL ghosting).

Note: On XL2720Z, if you use "AMA low" as above, and then change to an S-switch preset profile that has blur reduction DISABLED in the profile, the ghosting is just as good as the VG248QE, although this is for no blur reduction compared to Asus Tracefree=60 (note: disabling blur reduction in the OSD will NOT work for this trick, you have to disable it by switching to a profile preset that way).
Falkentyne
 
Posts: 2464
Joined: 26 Mar 2014, 07:23

Previous

Return to BENQ/Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc

Who is online

Users browsing this forum: Google [Bot] and 3 guests