ANNOUNCED: Blur Busters Strobe Utility -- for BENQ Z-Series!
Re: ANNOUNCED: Blur Busters Strobe Utility -- for BENQ Z-Ser
It would be good if everyone states his monitor model that is working/not working as well as the place where it was purchased so we might find out new firmware models might be shipping from already
- masterotaku
- Posts: 436
- Joined: 20 Dec 2013, 04:01
Re: ANNOUNCED: Blur Busters Strobe Utility -- for BENQ Z-Ser
Well, after playing in 3D, with Lightboost at 10% and exiting the game, Lightboost remained on. Colors are weird, but motion clarity and crosstalk are better. I'll probably use this trick until I send the monitor to BenQ or whatever solution they propose.
CPU: Intel Core i7 7700K @ 4.9GHz
GPU: Gainward Phoenix 1080 GLH
RAM: GSkill Ripjaws Z 3866MHz CL19
Motherboard: Gigabyte Gaming M5 Z270
Monitor: Asus PG278QR
GPU: Gainward Phoenix 1080 GLH
RAM: GSkill Ripjaws Z 3866MHz CL19
Motherboard: Gigabyte Gaming M5 Z270
Monitor: Asus PG278QR
Re: ANNOUNCED: Blur Busters Strobe Utility -- for BENQ Z-Ser
I recently tried to run the "The *beta* utility" and my XL2411Z was not compatible with the program. For all the curious people out there I got Mfg Date: December 2013, Rev:00-120-BA. To bad, looking forward to read some news from Benq now!
Re: ANNOUNCED: Blur Busters Strobe Utility -- for BENQ Z-Ser
Hi.
My manufacturing date is allso December 2013
but my firmware version is V001-20131008.
And why all this pm stuff, just post a link.
My manufacturing date is allso December 2013
but my firmware version is V001-20131008.
And why all this pm stuff, just post a link.
Re: ANNOUNCED: Blur Busters Strobe Utility -- for BENQ Z-Ser
jubaz : i think it's over in advance, firmware is well before december, which has bugged firmware, sorry !
But moreover i agree with you, we want the utility PUBLIC !, i own a topic in an another forum such that some users want to test if the utilty works in their new monitor, but they are french and can't really go here.
Mark, would you mind with all respect i have upon you to release it in a way that everyone are able to see it ?
But moreover i agree with you, we want the utility PUBLIC !, i own a topic in an another forum such that some users want to test if the utilty works in their new monitor, but they are french and can't really go here.
Mark, would you mind with all respect i have upon you to release it in a way that everyone are able to see it ?
- Rennkuckuck
- Posts: 7
- Joined: 13 Mar 2014, 16:19
Re: ANNOUNCED: Blur Busters Strobe Utility -- for BENQ Z-Ser
I also got the Firmware V001-201310008, but I found that BenQ Taiwan has published a newer Firmware Version for the XL27020Z which could be downloaded here: http://gaming.benq.com/downloads/ Its name is XL2720ZV2_20131209_2731.BIN
Is that the Firmware which is needed for the strobe utility? If yes, do you see a way of upgrading that on my own? You earlier mentioned a hardware with USB and DVI connector and a step by step instruction, but it seems this hardware is no longer available.. what is your opinion?
Thanks for your great job!
Is that the Firmware which is needed for the strobe utility? If yes, do you see a way of upgrading that on my own? You earlier mentioned a hardware with USB and DVI connector and a step by step instruction, but it seems this hardware is no longer available.. what is your opinion?
Thanks for your great job!
Re: ANNOUNCED: Blur Busters Strobe Utility -- for BENQ Z-Ser
forget (for a while) the StrobUtyjubaz wrote: My manufacturing date is allso December 2013
firmware version is V001-20131008.
My v001-20131008 -- DOESN'T WORK
Z's "perfume lost --
Take these again; for to the noble mind
Rich gifts wax poor when givers prove unkind."
Shipment -- BackPack
Payment -- MoneyBack
State -- Wait
Stand -- by Swift?
- Chief Blur Buster
- Site Admin
- Posts: 11653
- Joined: 05 Dec 2013, 15:44
- Location: Toronto / Hamilton, Ontario, Canada
- Contact:
Re: ANNOUNCED: Blur Busters Strobe Utility -- for BENQ Z-Ser
phroaig wrote:My v001-20131008 -- DOESN'T WORK
Keep tuned for forthcoming news/instructions on how to install that now-released firmware upgrade needed for Blur Busters Strobe Utility compatibility.Rennkuckuck wrote:I also got the Firmware V001-201310008, but I found that BenQ Taiwan has published a newer Firmware Version for the XL27020Z which could be downloaded here: http://gaming.benq.com/downloads/ Its name is XL2720ZV2_20131209_2731.BIN
Is that the Firmware which is needed for the strobe utility? If yes, do you see a way of upgrading that on my own? You earlier mentioned a hardware with USB and DVI connector and a step by step instruction, but it seems this hardware is no longer available.. what is your opinion?
Thanks for your great job!
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter
Forum Rules wrote: 1. Rule #1: Be Nice. This is published forum rule #1. Even To Newbies & People You Disagree With!
2. Please report rule violations If you see a post that violates forum rules, then report the post.
3. ALWAYS respect indie testers here. See how indies are bootstrapping Blur Busters research!
Re: ANNOUNCED: Blur Busters Strobe Utility -- for BENQ Z-Ser
just checked my firmware on my xl2420z in service menu it says v001-20131126, but on case it says december..gz benq on confusing people
I guess the utility wont work...i see firmware is up for download for my model too. now waiting for the news from benq.
I guess the utility wont work...i see firmware is up for download for my model too. now waiting for the news from benq.
Re: ANNOUNCED: Blur Busters Strobe Utility -- for BENQ Z-Ser
Hello ! Can you pm me the link for the utility ? I have a XL2411Z with a firmware of December 2013. Thanks !