XL2540 Question

Adjusting BENQ Blur Reduction and DyAc (Dynamic Acceleration) including Blur Busters Strobe Utility. Supports most BenQ/Zowie Z-Series monitors (XL2411, XL2420, XL2720, XL2735, XL2540, XL2546)
Post Reply
perling
Posts: 10
Joined: 28 Mar 2018, 09:05

XL2540 Question

Post by perling » 28 Mar 2018, 09:11

Hey there ,

To the first thanks for your Great Work !

I have the 2540 and Activate the Strobe Tool is it normal that i must push the Crosstalk Area to 95?

User avatar
Chief Blur Buster
Site Admin
Posts: 11647
Joined: 05 Dec 2013, 15:44
Location: Toronto / Hamilton, Ontario, Canada
Contact:

Re: XL2540 Question

Post by Chief Blur Buster » 28 Mar 2018, 12:14

perling wrote:Hey there ,
To the first thanks for your Great Work !
I have the 2540 and Activate the Strobe Tool is it normal that i must push the Crosstalk Area to 95?
This is what sometimes happens on the 240 Hz BenQ/Zowies -- screen centre sometimes look best with such large offsets.

The main effect is slightly shifted input-lag gradient effects (since input lag is lowest in the areas immediately above the strobe crosstalk band, and highest in the areas just below the strobe crosstalk band). That said, the refresh cycle of a 240Hz monitor is only 4.2ms and the average strobe lag is only 2ms at 240Hz. At this stage, for many gameplay tactics, the blur reduction advantages can outweigh.
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter

Image
Forum Rules wrote:  1. Rule #1: Be Nice. This is published forum rule #1. Even To Newbies & People You Disagree With!
  2. Please report rule violations If you see a post that violates forum rules, then report the post.
  3. ALWAYS respect indie testers here. See how indies are bootstrapping Blur Busters research!

perling
Posts: 10
Joined: 28 Mar 2018, 09:05

Re: XL2540 Question

Post by perling » 28 Mar 2018, 15:34

Thank you very much for the Answer :=)

Post Reply