Hi,
I have two Benq monitor, the xl2411z and xl2546.
When I turn on the blur reduction on my 2411, after using strobe utility, the image is completely clear at 144hz.
I try to get a clear image with the 2546 at 240hz but the best image I can get is this (same problem at 144-120hz):
Someone can help me?
AMA on XL2546
- Chief Blur Buster
- Site Admin
- Posts: 11653
- Joined: 05 Dec 2013, 15:44
- Location: Toronto / Hamilton, Ontario, Canada
- Contact:
Re: AMA on XL2546
The higher the Hz, the less time to fit LCD pixel response between refresh cycles:MagneticDev wrote:Hi,
I have two Benq monitor, the xl2411z and xl2546.
When I turn on the blur reduction on my 2411, after using strobe utility, the image is completely clear at 144hz.
I try to get a clear image with the 2546 at 240hz but the best image I can get is this (same problem at 144-120hz):
Someone can help me?
The smaller the vertical total, the less time to fit LCD pixel response between refresh cycles:
-- You can thin the crosstalk zones by using bigger Vertical Totals and/or lower Hz (maximal benefits occurs when you do both simultaneously).
I suggest lowering your refresh rate to roughly 180-182Hz to create more time between refresh cycles:
For other custom refresh rates, try Appendix A of Advanced Crosstalk FAQ.
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter
Forum Rules wrote: 1. Rule #1: Be Nice. This is published forum rule #1. Even To Newbies & People You Disagree With!
2. Please report rule violations If you see a post that violates forum rules, then report the post.
3. ALWAYS respect indie testers here. See how indies are bootstrapping Blur Busters research!