MSTAR ISP rent/buy/sell/trade [upgrade BENQ to V2 firmware]

Adjusting BENQ Blur Reduction and DyAc (Dynamic Acceleration) including Blur Busters Strobe Utility. Supports most BenQ/Zowie Z-Series monitors (XL2411, XL2420, XL2720, XL2735, XL2540, XL2546)
Gymnae
Posts: 6
Joined: 26 Apr 2014, 05:03

Re: MSTAR ISP rent/buy/sell/trade [upgrade BENQ to V2 firmwa

Post by Gymnae » 26 Apr 2014, 05:06

Hallo aus München,
ich würde mir gerne einen Programmer leihen. Für die Besitzer aus Deutschland, man könnte eine Leihgebühr pro Tag vereinbaren, so dass jeder auf seine Kosten kommt.

Hello from Munich, Germany
I'd like to rent a programmer. If you own one, we can agree on a rental or daily fee to get you covered.
Mouzuone wrote:I built 3 upgrade cables so far and rent them within Germany. Anybody interested can send me a pm.
I'd sent you a PM, but I can't because I am below the posting limit.

Cheers
Last edited by Gymnae on 26 Apr 2014, 09:24, edited 1 time in total.

Gymnae
Posts: 6
Joined: 26 Apr 2014, 05:03

Re: MSTAR ISP rent/buy/sell/trade [upgrade BENQ to V2 firmwa

Post by Gymnae » 26 Apr 2014, 09:29

Mouzoune,
leider habe ich keine Berechtigung hier PMs zu lesen, schreib mir doch bitte auf: dagorwaith _at_ gmail.com

nico_angelo
Posts: 1
Joined: 26 Apr 2014, 09:41

Re: MSTAR ISP rent/buy/sell/trade [upgrade BENQ to V2 firmwa

Post by nico_angelo » 26 Apr 2014, 09:47

Hallo ich suche ein modifiziertes kabel oder diese Platine lebe in der nähe von oldenburg

Mouzuone
Posts: 40
Joined: 21 Jan 2014, 05:54

Re: MSTAR ISP rent/buy/sell/trade [upgrade BENQ to V2 firmwa

Post by Mouzuone » 26 Apr 2014, 11:31

Meine Mailadresse steht im Profil.

derredbaron
Posts: 5
Joined: 26 Apr 2014, 15:08

Re: MSTAR ISP rent/buy/sell/trade [upgrade BENQ to V2 firmwa

Post by derredbaron » 26 Apr 2014, 15:15

Servus, für 50 inkl. hätte ich einen MSTAR ISP abzugeben. Komme aus der Nähe Offenburg.

Grüßle

BoB-Xygene
Posts: 1
Joined: 26 Apr 2014, 18:51

Re: MSTAR ISP rent/buy/sell/trade [upgrade BENQ to V2 firmwa

Post by BoB-Xygene » 26 Apr 2014, 19:48

I have flashed my XL2720Z to firmware version 2 with the Do It Yourself tool.
The plan for the tool is at http://forums.blurbusters.com/download/file.php?id=10
The software howto is documented at http://www.blurbusters.com/benq/diy-fir ... -z-series/

As transistor i used two C945 NPN that can be found in any dead power supply.
(datasheet http://pdf1.alldatasheet.com/datasheet- ... /C945.html)
As resistor i used two 100 Ohm that i found in a dead power supply too.

I didn't have female vga plug so i made just a direct cord from a vga cable and a parallel cable.

As a token of gratitude for the documents i put images of my finished cable.
Note that from the vga i just joined all the groundings together (as indicated in the plan) and took the black (grounding) and the grey and the orange (TX and RX). Hope the colors are standard, else you will have to check the plan (but beware the plan shows backside of the connectors).

The pictures shows the assembly under different point of view :
http://Franck.Bouchindhomme.pagesperso- ... 020710.JPG
http://Franck.Bouchindhomme.pagesperso- ... 020711.JPG
http://Franck.Bouchindhomme.pagesperso- ... 020712.JPG
http://Franck.Bouchindhomme.pagesperso- ... 020715.JPG
http://Franck.Bouchindhomme.pagesperso- ... 020716.JPG
http://Franck.Bouchindhomme.pagesperso- ... 020717.JPG
http://Franck.Bouchindhomme.pagesperso- ... 020718.JPG
http://Franck.Bouchindhomme.pagesperso- ... 020720.JPG
http://Franck.Bouchindhomme.pagesperso- ... 020724.JPG
http://Franck.Bouchindhomme.pagesperso- ... 020749.JPG
http://Franck.Bouchindhomme.pagesperso- ... 020756.JPG
http://Franck.Bouchindhomme.pagesperso- ... 020758.JPG
http://Franck.Bouchindhomme.pagesperso- ... 020761.JPG
http://Franck.Bouchindhomme.pagesperso- ... 020765.JPG
http://Franck.Bouchindhomme.pagesperso- ... 020774.JPG
http://Franck.Bouchindhomme.pagesperso- ... 020781.JPG

Nota: As i used transistors from deads power supply i used an antic transistor tester to validate their good condition before assembly.

Gymnae
Posts: 6
Joined: 26 Apr 2014, 05:03

Re: MSTAR ISP rent/buy/sell/trade [upgrade BENQ to V2 firmwa

Post by Gymnae » 27 Apr 2014, 05:44

derredbaron wrote:Servus, für 50 inkl. hätte ich einen MSTAR ISP abzugeben. Komme aus der Nähe Offenburg.

Grüßle
Hey, kannst du mich bitte kontaktieren? PM lesen oder empfangen geht nicht. Meine eMail ist im Profil.

tarr0
Posts: 11
Joined: 06 Apr 2014, 03:28

Re: MSTAR ISP rent/buy/sell/trade [upgrade BENQ to V2 firmwa

Post by tarr0 » 27 Apr 2014, 07:19

Hi i'm looking to rent/buy an Mstar ISP, preferably from someone in the UK to make things easier. Anybody have one available?

derredbaron
Posts: 5
Joined: 26 Apr 2014, 15:08

Re: MSTAR ISP rent/buy/sell/trade [upgrade BENQ to V2 firmwa

Post by derredbaron » 27 Apr 2014, 12:29

My MSTAR ISP goes to Gymnae.

Moonraise
Posts: 3
Joined: 25 Apr 2014, 11:52

Re: MSTAR ISP rent/buy/sell/trade [upgrade BENQ to V2 firmwa

Post by Moonraise » 27 Apr 2014, 13:25

Still have one MSTAR ISP for Germany. Email is in my profile.

Post Reply