Can't use Strobe Utility on XL2411Z (New unseen error)

Adjusting BENQ Blur Reduction and DyAc (Dynamic Acceleration) including Blur Busters Strobe Utility. Supports most BenQ/Zowie Z-Series monitors (XL2411, XL2420, XL2720, XL2735, XL2540, XL2546)
Post Reply
Sunless
Posts: 1
Joined: 04 Sep 2018, 14:21

Can't use Strobe Utility on XL2411Z (New unseen error)

Post by Sunless » 04 Sep 2018, 14:49

I am trying to set my XL2411Z up for the best settings on CSGO. I am using 120hz DVI-D dual link. Can anyone help me run this program please?

Image

mst 8556T
v004-20141205 (firmware version)
strobe duty 020
strobe phase 100
single strobe off

are my settings right now.

User avatar
Chief Blur Buster
Site Admin
Posts: 11647
Joined: 05 Dec 2013, 15:44
Location: Toronto / Hamilton, Ontario, Canada
Contact:

Re: Can't use Strobe Utility on XL2411Z (New unseen error)

Post by Chief Blur Buster » 05 Sep 2018, 15:05

- Try a different cable (or different port on monitor)
- Try a different video port on your card
- If you have a 2nd computer at home, test it too
- Try running the software as Administrator Mode (this is no longer needed for Strobe Utility 2.0.9 but do this test)

Barring that -- the Service Menu is also an alternative (harder) way of adjusting the same settings that Strobe Utility is (much more easily) able to do.
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter

Image
Forum Rules wrote:  1. Rule #1: Be Nice. This is published forum rule #1. Even To Newbies & People You Disagree With!
  2. Please report rule violations If you see a post that violates forum rules, then report the post.
  3. ALWAYS respect indie testers here. See how indies are bootstrapping Blur Busters research!

Post Reply