Hello guys,
does it matter on which values these two settings are? Does it have a negative input if i activate Blur Reduction? What would be the best settings for FPS games and low input lag?
Best Regards
Zowie XL2540 Blur Reduction Intensity/Area settings
- Chief Blur Buster
- Site Admin
- Posts: 11648
- Joined: 05 Dec 2013, 15:44
- Location: Toronto / Hamilton, Ontario, Canada
- Contact:
Re: Zowie XL2540 Blur Reduction Intensity/Area settings
It's geometry based -- one location of screen will always have the worst lag and a different location on screen will always have the lowest lag. Lag shifts when the crosstalk zone shifts. The lowest lag is always the area right above the crosstalk zone and the highest lag is always the area right below the crosstalk zone. It's in the FAQ near the bottom of the Blur Busters Strobe Utility page.
These images are for 120Hz, your will be 240Hz so halve all the numbers shown (4ms instead of 8ms)
Images of http://www.testufo.com/crosstalk while calibrating strobe adjustments:
The input lag is a timing interaction between sequential top-to-bottom LCD scanout versus the all-at-once global backlight flash.
With Blur Busters Strobe Utility, you can move the crosstalk zone up/down while simultaneously watching a TestUFO test pattern, without needing to go into the Factory menu.
More animations: in this thread.
These images are for 120Hz, your will be 240Hz so halve all the numbers shown (4ms instead of 8ms)
Images of http://www.testufo.com/crosstalk while calibrating strobe adjustments:
The input lag is a timing interaction between sequential top-to-bottom LCD scanout versus the all-at-once global backlight flash.
With Blur Busters Strobe Utility, you can move the crosstalk zone up/down while simultaneously watching a TestUFO test pattern, without needing to go into the Factory menu.
More animations: in this thread.
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter
Forum Rules wrote: 1. Rule #1: Be Nice. This is published forum rule #1. Even To Newbies & People You Disagree With!
2. Please report rule violations If you see a post that violates forum rules, then report the post.
3. ALWAYS respect indie testers here. See how indies are bootstrapping Blur Busters research!