[HELP] Benq Zowie XL2546 Setting For PUBG

Adjusting BENQ Blur Reduction and DyAc (Dynamic Acceleration) including Blur Busters Strobe Utility. Supports most BenQ/Zowie Z-Series monitors (XL2411, XL2420, XL2720, XL2735, XL2540, XL2546)
Post Reply
ims2bojio
Posts: 2
Joined: 07 Jan 2019, 03:50

[HELP] Benq Zowie XL2546 Setting For PUBG

Post by ims2bojio » 07 Jan 2019, 03:52

Hi i need guides what to setting to gain the most competitive advantage i could have with my ZowieXL2546. What are the best setting for the refresh rate and monitor settings?
Thanks

User avatar
Chief Blur Buster
Site Admin
Posts: 11647
Joined: 05 Dec 2013, 15:44
Location: Toronto / Hamilton, Ontario, Canada
Contact:

Re: [HELP] Benq Zowie XL2546 Setting For PUBG

Post by Chief Blur Buster » 12 Jan 2019, 00:23

For lowest lag in situations avoiding blur reduction, 240Hz + DyAc OFF + VSYNC OFF

For lowest lag blur reduction, 240Hz + DyAc ON

For situations requiring better motion clarity (at the expense of more lag), 120Hz-180Hz DyAc with Large Veritcal Totals are best, especially when combined with VSYNC ON or the other low-lag VSYNC tricks (e.g. RTSS scanline sync).

Pick your compromise. The Right Tool For The Right Job...!
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter

Image
Forum Rules wrote:  1. Rule #1: Be Nice. This is published forum rule #1. Even To Newbies & People You Disagree With!
  2. Please report rule violations If you see a post that violates forum rules, then report the post.
  3. ALWAYS respect indie testers here. See how indies are bootstrapping Blur Busters research!

BlurBoss
Posts: 92
Joined: 17 Dec 2018, 13:52

Re: [HELP] Benq Zowie XL2546 Setting For PUBG

Post by BlurBoss » 12 Jan 2019, 05:52

PUBG doesn't provide 240 FPS even on i9-9900K and RTX 2080 Ti, you're better off with a solution listed above and 120 Hz mode.
BenQ XL2546, i9-9900K @ 5.0 GHz, RTX 2080 Ti, 32GB (2 x 16GB) 3200 MHz CL14 RAM, Asrock Z390 Phantom Gaming-ITX/ac.

Post Reply