Hi everyone i've been lurking blur busters forum for couple of months now and makes me wonder if is there an input lag if DyAc is on. because i'm a slow shooter and i always struggle aiming enemies on the game. So is there a way to get rid of the small trail on the picture below.
i've tried settings the Vertical totals to 1584 @144hz but there seem to be a frame skipping
BENQ XL2456 Ghosting Trail?
-
- Posts: 2795
- Joined: 26 Mar 2014, 07:23
Re: BENQ XL2456 Ghosting Trail?
Open up the "factory" menu (the one with those big blue windows) and mess around with the "OD Gain" setting. Make sure that AMA is set to "High" *before* doing this.
Re: BENQ XL2456 Ghosting Trail?
Ok will do thanks for your reply
- Chief Blur Buster
- Site Admin
- Posts: 11653
- Joined: 05 Dec 2013, 15:44
- Location: Toronto / Hamilton, Ontario, Canada
- Contact:
Re: BENQ XL2456 Ghosting Trail?
Yes, you need to make sure that the overdrive is adjusted properly for best AMA quality.
Also, are you sure that is a 144Hz photo at 960 pixels/second? The tiny steps between the UFOs suggest you took that photograph at 240Hz instead of 144Hz.
Also, are you sure that is a 144Hz photo at 960 pixels/second? The tiny steps between the UFOs suggest you took that photograph at 240Hz instead of 144Hz.
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter
Forum Rules wrote: 1. Rule #1: Be Nice. This is published forum rule #1. Even To Newbies & People You Disagree With!
2. Please report rule violations If you see a post that violates forum rules, then report the post.
3. ALWAYS respect indie testers here. See how indies are bootstrapping Blur Busters research!