BenQ XL2411P can't measure refresh rate at 144hz

NEW for 2017: Discussion about the testufo.com Blur Busters Motion Tests. Widely used by enthusiasts, display tweakers, YouTubers reviewers, monitor manufacturers and VR headset makers!
Post Reply
PlayTekken
Posts: 4
Joined: 07 Mar 2019, 19:04

BenQ XL2411P can't measure refresh rate at 144hz

Post by PlayTekken » 20 Apr 2020, 09:43

I bought an XL2411P so that I could use blur reduction mode anywhere from 60hz to 144hz, and am trying to get low-lag VSYNC to work. I'm having trouble using the refresh rate test at https://www.testufo.com/refreshrate, though. When I go to display properties and set my monitor to 144hz, the refresh reate test fails and tells me VSYNC can't start. If I set it to 120hz it works fine. Does anyone know what could be causing this? Thanks in advance!
Top
User avatar
Chief Blur Buster
Site Admin
Posts: 11653
Joined: 05 Dec 2013, 15:44
Location: Toronto / Hamilton, Ontario, Canada
Contact:
Contact Chief Blur Buster

Re: BenQ XL2411P can't measure refresh rate at 144hz

Post by Chief Blur Buster » 29 Apr 2020, 04:35

This is a browser issue, not a monitor issue.

Try unplugging your 60Hz monitors. Multimonitor will give you refresh rate interference.

Try switching between FireFox and Chrome.

(Moved this to the TestUFO forum)
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter

Image
Forum Rules wrote:  1. Rule #1: Be Nice. This is published forum rule #1. Even To Newbies & People You Disagree With!
  2. Please report rule violations If you see a post that violates forum rules, then report the post.
  3. ALWAYS respect indie testers here. See how indies are bootstrapping Blur Busters research!
Top
Post Reply

Return to “Test UFO Motion Tests”