Hello,
Usually 24GL600f would say out of range for any hz above 153. So I decided to use Large Vertical Totals, following the Chief's guide. However, maximum pixel clock allowed by the display was only 340Mhz so there wasn't much room for increasing Vertical Totals, unless lowering res or refresh rate. When looking around in the CRU, I found couple settings that seem to allow go above 340MHz pixel clock. So I put 380+MHz clock and managed to squeeze in quite some Vertical Totals.
Here are the settings I changed, but I honestly don't know what some of them do. Should have done some proper research
https://freeimage.host/i/1.HfBZQSt
https://freeimage.host/i/2.HfBZtHX
Also, there is HDMI 2.1 support tab, where there some options like auto-low latency mode and etc, however I don't know whether they work or not.
https://freeimage.host/i/3.HfBZsKN
I don't seem to have any visible issues with overclocked panel, nor I noticed significant improvement in motion clarity. Maybe it's just me. However, one thing is clear to me is that input lag has increased for some reason. Maybe it is the monitor controller not managing high pixel clock, or HDMI cable is not managing, IDK.
What are your thoughts?
Managed to "overclock" 24GL600f
Everything about displays and monitors. 120Hz, 144Hz, 240Hz, 4K, 1440p, input lag, display shopping, monitor purchase decisions, compare, versus, debate, and more. Questions? Just ask!
Return to “General — Displays, Graphics & More”
Jump to
- The Main Lobby
- ↳ General — Displays, Graphics & More
- ↳ News / Rumors / Conventions
- ↳ Input Lag / Display Lag / Network Lag
- ↳ Display Comfort — Eyestrain / Headaches / Motionsick
- Everything Better Than 60Hz™
- ↳ Eliminating Motion Blur — LightBoost / ULMB / ELMB / DyAc
- ↳ OLED Displays
- ↳ G-SYNC
- ↳ FreeSync
- ↳ Game Consoles — XBOX and PlayStation — ONE / Series S / Series X / PS5
- ↳ BENQ Zowie Tweaking — Strobe Utility / Blur Reduction / DyAc
- ↳ Display Overclocking
- The Laboratory
- ↳ Test UFO Motion Tests
- ↳ Area 51: Display Science, Research & Engineering
- ↳ Software Developers / Low-Lag Code / Game Programming
- ↳ Pursuit Camera Testing of Display Motion Blur
- ↳ High Frame Rate Video (HFR, UltraHFR, 120fps, 240fps, 1000fps)
- The Cafeteria
- ↳ Offtopic Lounge
- ↳ Niche Issues Affecting Latency — Electrical, Interference, EMI, Unexpected Causes, etc.
- ↳ Forum System / Registration / Suggestions