AW2523HF 360Hz cursor skipping
Posted: 11 Nov 2023, 22:21
Hello, I decided to try the AW2523HF. However, I've had many issues with it since I have a radeon GPU.
The first issue I've had and somewhat managed to resolve was the refresh rate was stuck at 30Hz, unless I created a dword:
While this fixed the 30Hz refresh rate limit issue, FreeSync was unavailable under radeon settings. Finally, I found that enabling "Smart HDR" in the OSD fixed the 30Hz issue and allowed FreeSync to be toggled. However, Smart HDR is disabled by default, so I imagine the potentially 5 other people with radeon GPUs that will also end up buying this monitor will run into this issue.
The next issue which I haven't been able to resolve is cursor skipping at higher refresh rates (~300+), and is the worst at 360Hz. I haven't noticed any frame skipping, yet the cursor doesn't get drawn every X amount of refreshes. This behavior did not exist on the Acer X25 360Hz, and this behavior does not exist when using the monitor with my iGPU. It happens on every OS I've tried (Win7, 10, and Troonix).
The first issue I've had and somewhat managed to resolve was the refresh rate was stuck at 30Hz, unless I created a dword:
Code: Select all
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E968-E325-11CE-BFC1-08002BE10318}\0000
DalSupportExternalPanelDrr=0
The next issue which I haven't been able to resolve is cursor skipping at higher refresh rates (~300+), and is the worst at 360Hz. I haven't noticed any frame skipping, yet the cursor doesn't get drawn every X amount of refreshes. This behavior did not exist on the Acer X25 360Hz, and this behavior does not exist when using the monitor with my iGPU. It happens on every OS I've tried (Win7, 10, and Troonix).