BenQ XL2546 Faulty Panel ( white screen )
BenQ XL2546 Faulty Panel ( white screen )
The menu buttons don't bring up the menu's its stuck on the white screen, tried dvi, hdmi and DP nothing works. Is it fully broken?
Re: BenQ XL2546 Faulty Panel ( white screen )
Yep. It's dead.
Steam • GitHub • Stack Overflow
The views and opinions expressed in my posts are my own and do not necessarily reflect the official policy or position of Blur Busters.
The views and opinions expressed in my posts are my own and do not necessarily reflect the official policy or position of Blur Busters.
Re: BenQ XL2546 Faulty Panel ( white screen )
Hello, bought this monitor today, 2 hours it worked fine but then it started to go to the white screen, off/on and it works again a minute or two and again goes to the white screen, is this marriage?
https://www.youtube.com/watch?v=zSqtrpOjpj0
https://www.youtube.com/watch?v=zSqtrpOjpj0
- Chief Blur Buster
- Site Admin
- Posts: 11653
- Joined: 05 Dec 2013, 15:44
- Location: Toronto / Hamilton, Ontario, Canada
- Contact:
Re: BenQ XL2546 Faulty Panel ( white screen )
It's probably an RMA situation here. This isn't normal.
You could try putting a desk fan behind the monitor and see what happens -- possibly that something defective is prematurely overheating inside the monitor as it warms up. But that is abnormal. (Unless you're running a very hot baseboard heater behind the monitor). If it's cycling, it may be a component that's failing momentarily, cools down, works again, overheats, stops working, cools down, works again, overheats, stops working -- cycle rinse and repeat.
You could try putting a desk fan behind the monitor and see what happens -- possibly that something defective is prematurely overheating inside the monitor as it warms up. But that is abnormal. (Unless you're running a very hot baseboard heater behind the monitor). If it's cycling, it may be a component that's failing momentarily, cools down, works again, overheats, stops working, cools down, works again, overheats, stops working -- cycle rinse and repeat.
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter
Forum Rules wrote: 1. Rule #1: Be Nice. This is published forum rule #1. Even To Newbies & People You Disagree With!
2. Please report rule violations If you see a post that violates forum rules, then report the post.
3. ALWAYS respect indie testers here. See how indies are bootstrapping Blur Busters research!
Re: BenQ XL2546 Faulty Panel ( white screen )
Thank you for the answer,I passed it to the service center for quality control, waiting for the result within 20 daysChief Blur Buster wrote:It's probably an RMA situation here. This isn't normal.
You could try putting a desk fan behind the monitor and see what happens -- possibly that something defective is prematurely overheating inside the monitor as it warms up. But that is abnormal. (Unless you're running a very hot baseboard heater behind the monitor). If it's cycling, it may be a component that's failing momentarily, cools down, works again, overheats, stops working, cools down, works again, overheats, stops working -- cycle rinse and repeat.