I still haven't figured out how to make this monitor better,should i use overclock? 240 or 280hz? Over driver 60 or 80?
when i active overclock i see this message "Overcloking may cause screen flickering.To reduce such effects,disconnect the DP cable and use the monitor OSD to try again with a safer max reflesh rate."
Someone help me?
asus VG259QM
Re: asus VG259QM
Game at 240hz, game at 280hz, what do you like more, try OD 60 try 80, notice any trails at 80? if so use 60, if you notice flickering at 280hz, go back to 240?
There's already at least 2 threads on this monitor, I'm sure it has useful info inside, also review sites test the OD settings and show what's good if you don't want to run the UFO yourself.
There's already at least 2 threads on this monitor, I'm sure it has useful info inside, also review sites test the OD settings and show what's good if you don't want to run the UFO yourself.
Re: asus VG259QM
I would like to know what are the settings of the users who have this monitor
Re: asus VG259QM
I would like to know what are the settings of the users who have this monitor
Re: asus VG259QM
-280hz
-Adaptive Sync ON (274fps cap)
-OD120
-Shadow boost LVL1
-FPS Mode (saturation 47)
-Brightness 70-90 during the day, 45-60 when it's dark.
-Contrast 80
Last edited by axaro1 on 31 Aug 2020, 01:04, edited 1 time in total.
XL2566K* | XV252QF* | LG C1* | HP OMEN X 25 | XL2546K | VG259QM | XG2402 | LS24F350[RIP]
*= currently owned
MONITOR: XL2566K custom VT: https://i.imgur.com/ylYkuLf.png
CPU: 5800x3d 102mhz BCLK
GPU: 3080FE undervolted
RAM: https://i.imgur.com/iwmraZB.png
MOUSE: Endgame Gear OP1 8k
KEYBOARD: Wooting 60he
*= currently owned
MONITOR: XL2566K custom VT: https://i.imgur.com/ylYkuLf.png
CPU: 5800x3d 102mhz BCLK
GPU: 3080FE undervolted
RAM: https://i.imgur.com/iwmraZB.png
MOUSE: Endgame Gear OP1 8k
KEYBOARD: Wooting 60he
Re: asus VG259QM
Re: asus VG259QM
I mistyped, I meant 274 for 280hz and 234 for 240hz.
Actually if you lock at 234 with a 280hz monitor you still get less input lag than locking a 240hz monitor at 234
XL2566K* | XV252QF* | LG C1* | HP OMEN X 25 | XL2546K | VG259QM | XG2402 | LS24F350[RIP]
*= currently owned
MONITOR: XL2566K custom VT: https://i.imgur.com/ylYkuLf.png
CPU: 5800x3d 102mhz BCLK
GPU: 3080FE undervolted
RAM: https://i.imgur.com/iwmraZB.png
MOUSE: Endgame Gear OP1 8k
KEYBOARD: Wooting 60he
*= currently owned
MONITOR: XL2566K custom VT: https://i.imgur.com/ylYkuLf.png
CPU: 5800x3d 102mhz BCLK
GPU: 3080FE undervolted
RAM: https://i.imgur.com/iwmraZB.png
MOUSE: Endgame Gear OP1 8k
KEYBOARD: Wooting 60he
Re: asus VG259QM
OD I only see 100 as maximum value
- Chief Blur Buster
- Site Admin
- Posts: 11653
- Joined: 05 Dec 2013, 15:44
- Location: Toronto / Hamilton, Ontario, Canada
- Contact:
Re: asus VG259QM
That's to be expected, since the latency of frame transmission from computer to monitor (and also, from monitor electronics to the panel) -- is often based on the display's max Hz. All frames are transmitted in 1/280sec, even at low frame rates, on a 280Hz monitor.
For those unaware, screens take time to refresh from top to bottom, as seen in high speed videos at www.blurbusters.com/scanout
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter
Forum Rules wrote: 1. Rule #1: Be Nice. This is published forum rule #1. Even To Newbies & People You Disagree With!
2. Please report rule violations If you see a post that violates forum rules, then report the post.
3. ALWAYS respect indie testers here. See how indies are bootstrapping Blur Busters research!
Re: asus VG259QM
Do you turn on vivid pixel at all? A click looks sharper.
No matter what I try the two TN panels on the sides I have (XL2540, XB252Q) still pop a bit more. Is it because this is an AU Optronics panel and it's just going to be washed out?
I had a couple of 1440p IPS' a few years ago and I remember the PQ looking way better than the TN I had next to them, I just didn't like the smearing.