Gigabyte M32Q Review

Everything about displays and monitors. 120Hz, 144Hz, 240Hz, 4K, 1440p, input lag, display shopping, monitor purchase decisions, compare, versus, debate, and more. Questions? Just ask!
User avatar
Discorz
VIP Member
Posts: 999
Joined: 06 Sep 2019, 02:39
Location: Europe, Croatia
Contact:

Re: Gigabyte M32Q Review

Post by Discorz » 17 Nov 2021, 18:38

Verneclover wrote:
16 Nov 2021, 20:54
It happens only in motion and there is no movement to the lines.
Compare UFOs | Do you use Blur Reduction? | Smooth Frog | Latency Split Test
Alienware AW2521H, Gigabyte M32Q, Asus VG279QM, Alienware AW2518HF, AOC C24G1, AOC G2790PX, Setup

Verneclover
Posts: 3
Joined: 14 Nov 2021, 18:57

Re: Gigabyte M32Q Review

Post by Verneclover » 17 Nov 2021, 19:25

Discorz wrote:
17 Nov 2021, 18:38
Verneclover wrote:
16 Nov 2021, 20:54
It happens only in motion and there is no movement to the lines.
Then it is not a problem for me. Thank you , you helped a lot!

vizionblind
Posts: 20
Joined: 21 Aug 2014, 11:31

Re: Gigabyte M32Q Review

Post by vizionblind » 25 Nov 2021, 21:01

HELLO. You mention to use the balanced setting but RTNGS recommends picture. thoughts?

User avatar
Discorz
VIP Member
Posts: 999
Joined: 06 Sep 2019, 02:39
Location: Europe, Croatia
Contact:

Re: Gigabyte M32Q Review

Post by Discorz » 26 Nov 2021, 03:32

Both are about the same. Balance just gives it an slight edge and overshoot is minimal.
Compare UFOs | Do you use Blur Reduction? | Smooth Frog | Latency Split Test
Alienware AW2521H, Gigabyte M32Q, Asus VG279QM, Alienware AW2518HF, AOC C24G1, AOC G2790PX, Setup

vizionblind
Posts: 20
Joined: 21 Aug 2014, 11:31

Re: Gigabyte M32Q Review

Post by vizionblind » 27 Nov 2021, 15:32

Discorz wrote:
26 Nov 2021, 03:32
Both are about the same. Balance just gives it an slight edge and overshoot is minimal.
ty

legend2k
Posts: 1
Joined: 01 Mar 2022, 05:56

Re: Gigabyte M32Q Review

Post by legend2k » 01 Mar 2022, 06:26

Hi, Thank you for the detailed review!

Did you notice any issue while the LFC was active? like stuttering, etc
Is it possible to lower the VRR's lower limit (to 40fps or less) using CRU? Does it cause any problem?

User avatar
Discorz
VIP Member
Posts: 999
Joined: 06 Sep 2019, 02:39
Location: Europe, Croatia
Contact:

Re: Gigabyte M32Q Review

Post by Discorz » 01 Mar 2022, 17:32

legend2k wrote:
01 Mar 2022, 06:26
Hi, Thank you for the detailed review!

Did you notice any issue while the LFC was active? like stuttering, etc
Is it possible to lower the VRR's lower limit (to 40fps or less) using CRU? Does it cause any problem?
Yes, you might notice occasional stutter when LFC toggles on/off. I tried modifying VRR minimums to 30 and 40 and M32Q seems to not like it. Screen goes black bellow 48 fps and will stay black until framerate goes back above 48. Modifying VRR range to higher than 48 values works ok, but still some toggle stutters can be noticed, not always tho. (All tested in Smooth Frog on AMD gpu)
Compare UFOs | Do you use Blur Reduction? | Smooth Frog | Latency Split Test
Alienware AW2521H, Gigabyte M32Q, Asus VG279QM, Alienware AW2518HF, AOC C24G1, AOC G2790PX, Setup

User avatar
Discorz
VIP Member
Posts: 999
Joined: 06 Sep 2019, 02:39
Location: Europe, Croatia
Contact:

Re: Gigabyte M32Q Review

Post by Discorz » 07 Mar 2022, 17:02

Turns out M32Q can do 60 Hz Single Strobe VRR. Well kind of. Read more here: viewtopic.php?f=4&t=9801
Compare UFOs | Do you use Blur Reduction? | Smooth Frog | Latency Split Test
Alienware AW2521H, Gigabyte M32Q, Asus VG279QM, Alienware AW2518HF, AOC C24G1, AOC G2790PX, Setup

Fnaticx
Posts: 4
Joined: 02 Apr 2022, 09:59

Re: Gigabyte M32Q Review

Post by Fnaticx » 02 Apr 2022, 10:04

Yo i bought this monitor since July 2021 and i keep hearing about Aim Stabilizer Sync and that it works for 85hz the only thing i got is Aim Stabilizer On/Off and every time free sync is On Aim stabilizer turns off so can someone please tell me how to enable Aim Stabilizer (BFI) and Freesync at the same time? can't believe i have the monitor for so long and don't know how to set that up, thank you.

User avatar
RealNC
Site Admin
Posts: 3730
Joined: 24 Dec 2013, 18:32
Contact:

Re: Gigabyte M32Q Review

Post by RealNC » 03 Apr 2022, 05:56

Fnaticx wrote:
02 Apr 2022, 10:04
can someone please tell me how to enable Aim Stabilizer (BFI) and Freesync at the same time?
Apparently you need to enable something called "Aim Stabilizer Sync".
SteamGitHubStack Overflow
The views and opinions expressed in my posts are my own and do not necessarily reflect the official policy or position of Blur Busters.

Post Reply