It happens only in motion and there is no movement to the lines.
Gigabyte M32Q Review
Re: Gigabyte M32Q Review
Compare UFOs | Do you use Blur Reduction? | Smooth Frog | Latency Split Test
Alienware AW2521H, Gigabyte M32Q, Asus VG279QM, Alienware AW2518HF, AOC C24G1, AOC G2790PX, Setup
Alienware AW2521H, Gigabyte M32Q, Asus VG279QM, Alienware AW2518HF, AOC C24G1, AOC G2790PX, Setup
-
- Posts: 3
- Joined: 14 Nov 2021, 18:57
Re: Gigabyte M32Q Review
-
- Posts: 20
- Joined: 21 Aug 2014, 11:31
Re: Gigabyte M32Q Review
HELLO. You mention to use the balanced setting but RTNGS recommends picture. thoughts?
Re: Gigabyte M32Q Review
Both are about the same. Balance just gives it an slight edge and overshoot is minimal.
Compare UFOs | Do you use Blur Reduction? | Smooth Frog | Latency Split Test
Alienware AW2521H, Gigabyte M32Q, Asus VG279QM, Alienware AW2518HF, AOC C24G1, AOC G2790PX, Setup
Alienware AW2521H, Gigabyte M32Q, Asus VG279QM, Alienware AW2518HF, AOC C24G1, AOC G2790PX, Setup
-
- Posts: 20
- Joined: 21 Aug 2014, 11:31
Re: Gigabyte M32Q Review
Hi, Thank you for the detailed review!
Did you notice any issue while the LFC was active? like stuttering, etc
Is it possible to lower the VRR's lower limit (to 40fps or less) using CRU? Does it cause any problem?
Did you notice any issue while the LFC was active? like stuttering, etc
Is it possible to lower the VRR's lower limit (to 40fps or less) using CRU? Does it cause any problem?
Re: Gigabyte M32Q Review
Yes, you might notice occasional stutter when LFC toggles on/off. I tried modifying VRR minimums to 30 and 40 and M32Q seems to not like it. Screen goes black bellow 48 fps and will stay black until framerate goes back above 48. Modifying VRR range to higher than 48 values works ok, but still some toggle stutters can be noticed, not always tho. (All tested in Smooth Frog on AMD gpu)
Compare UFOs | Do you use Blur Reduction? | Smooth Frog | Latency Split Test
Alienware AW2521H, Gigabyte M32Q, Asus VG279QM, Alienware AW2518HF, AOC C24G1, AOC G2790PX, Setup
Alienware AW2521H, Gigabyte M32Q, Asus VG279QM, Alienware AW2518HF, AOC C24G1, AOC G2790PX, Setup
Re: Gigabyte M32Q Review
Turns out M32Q can do 60 Hz Single Strobe VRR. Well kind of. Read more here: viewtopic.php?f=4&t=9801
Compare UFOs | Do you use Blur Reduction? | Smooth Frog | Latency Split Test
Alienware AW2521H, Gigabyte M32Q, Asus VG279QM, Alienware AW2518HF, AOC C24G1, AOC G2790PX, Setup
Alienware AW2521H, Gigabyte M32Q, Asus VG279QM, Alienware AW2518HF, AOC C24G1, AOC G2790PX, Setup
Re: Gigabyte M32Q Review
Yo i bought this monitor since July 2021 and i keep hearing about Aim Stabilizer Sync and that it works for 85hz the only thing i got is Aim Stabilizer On/Off and every time free sync is On Aim stabilizer turns off so can someone please tell me how to enable Aim Stabilizer (BFI) and Freesync at the same time? can't believe i have the monitor for so long and don't know how to set that up, thank you.
Re: Gigabyte M32Q Review
Apparently you need to enable something called "Aim Stabilizer Sync".
Steam • GitHub • Stack Overflow
The views and opinions expressed in my posts are my own and do not necessarily reflect the official policy or position of Blur Busters.
The views and opinions expressed in my posts are my own and do not necessarily reflect the official policy or position of Blur Busters.