Re: New 240hz monitor
Posted: 26 Nov 2021, 16:00
https://imgur.com/a/7JZ1GFr - 24g2ze MBR 10,15
Not too sure about crosstalk but 15 doesn't look great to me
Not too sure about crosstalk but 15 doesn't look great to me
Who you gonna call? The Blur Busters! For Everything Better Than 60Hz™
https://forums.blurbusters.com/
this looks like xg2431. Didn't know MBR on aoc is "this" good.buddha wrote: ↑26 Nov 2021, 16:00https://imgur.com/a/7JZ1GFr - 24g2ze MBR 10,15
Not too sure about crosstalk but 15 doesn't look great to me
I think you had slower moving ufo speed with MBR 10. Trailing edge should be equally wide as on MBR 15 shot (4 pixels from previous frame at 960pps). Lower speeds have less ghosting/double imaging.
I am pretty sure I used the same speed, can't be certain, but I did change a lot of colour settings on this particular mode so I could see (better.) I will do some more with default mode and top and bottom of screen.Discorz wrote: ↑27 Nov 2021, 08:35I think you had slower moving ufo speed with MBR 10. Trailing edge should be equally wide as on MBR 15 shot (4 pixels from previous frame at 960pps). Lower speeds have less ghosting/double imaging.
Do two more, perhaps MBR 10 but on top and bottom screen. U can move ufos patterns by clicking and dragging mouse.
XG2431 is far better tuned. But 24G2ZU OD Strong = XG2431 OD OFF (cca). Plus you can't adjust strobe phase on AOC and it doesn't use large VTs.
Just checked. I was wrong. MBR 10 shot is fine. With longer pulse yellow color smears over making the gap look narrow.
For the HP could you try playing with the contrast like lowering it then upping the brightness to compensate then test the unstrobed ufos. See if you could make the ufo look better.buddha wrote: ↑27 Nov 2021, 10:26I am pretty sure I used the same speed, can't be certain, but I did change a lot of colour settings on this particular mode so I could see (better.) I will do some more with default mode and top and bottom of screen.Discorz wrote: ↑27 Nov 2021, 08:35I think you had slower moving ufo speed with MBR 10. Trailing edge should be equally wide as on MBR 15 shot (4 pixels from previous frame at 960pps). Lower speeds have less ghosting/double imaging.
Do two more, perhaps MBR 10 but on top and bottom screen. U can move ufos patterns by clicking and dragging mouse.
XG2431 is far better tuned. But 24G2ZU OD Strong = XG2431 OD OFF (cca). Plus you can't adjust strobe phase on AOC and it doesn't use large VTs.
I am going to return the AOC and HP soon, and maybe the Asus too so if anyone has any requests let me know.
I am thinking about trying the Omen X 27 so I'll certainly take some shots if I do.Discorz wrote: ↑27 Nov 2021, 11:36Just checked. I was wrong. MBR 10 shot is fine. With longer pulse yellow color smears over making the gap look narrow.
I'm real interested in Omen X 27 motion. Do you have it? Its on top of Hardware Unboxed charts but there is not a single pursuit of it online.
Btw, VG didn't turn out good because image is a bit overexposed. That is easily fixable by reducing monitor brightness camera ISO.
The pictures I took are with the fps gaming mode which has brightness very high. I would take some more but I don't have time right now and I have to take the Omen back tomorrow.
Wow man this is great!buddha wrote: ↑27 Nov 2021, 12:04https://imgur.com/a/P8QOP3q AOC Strobed top and bottom of screen but I was in a bit of a rush
I am thinking about trying the Omen X 27 so I'll certainly take some shots if I do.
Thanks for the advice on the VG, I will bear the ISO in mind next time