Logical Problem Solving Way

Separate area for niche lag issues including unexpected causes and/or electromagnetic interference (ECC = retransmits = lag). Interference (EMI, EMF) of all kinds (wired, wireless, external, internal, environment, bad component) can cause error-correction latencies like a bad modem connection. Troubleshooting may require university degree. Your lag issue is likely not EMI. Please read this before entering sub-forum.
Forum rules
IMPORTANT:
This subforum is for advanced users only. This separate area is for niche or unexpected lag issues such as electromagnetic interference (EMI, EMF, electrical, radiofrequency, etc). Interference of all kinds (wired, wireless, external, internal, environment, bad component) can cause error-correction (ECC) latencies like a bad modem connection, except internally in a circuit. ECC = retransmits = lag. Troubleshooting may require university degree. Your lag issue is likely not EMI.
🠚 You Must Read This First Before Submit Post or Submit Reply
timecard
Posts: 66
Joined: 25 Jan 2020, 01:10

Re: Logical Problem Solving Way

Post by timecard » 21 Oct 2023, 11:01

Can you see if you're getting any significant debounce latency? Some keyboards won't go lower then ~22ms on this test because of it (razer huntsman elite), the newer huntsman elite v2 can change this setting.

https://blog.seethis.link/scan-rate-estimator/

The easiest way to get low results is to lightly tap/flick the edge of the key so key up/down state is near instantaneous. Maybe it'll provide additional insights into your issues.

InputLagger
Posts: 203
Joined: 13 Sep 2021, 12:39
Location: RUS

Re: Logical Problem Solving Way

Post by InputLagger » 25 Dec 2023, 22:07

Mods, why not to move this topic to input lag forum, so more people can find it and give something positive to these tests methodology ?

velorias
Posts: 9
Joined: 15 Oct 2023, 20:36
Location: Ukralne

Re: Logical Problem Solving Way

Post by velorias » 26 Dec 2023, 03:33

InputLagger wrote:
25 Dec 2023, 22:07
Mods, why not to move this topic to input lag forum, so more people can find it and give something positive to these tests methodology ?
Good idea. But who can do it? Admin only? I don't think, I have permissions for this.

delve
Posts: 146
Joined: 15 Aug 2020, 05:24

Re: Logical Problem Solving Way

Post by delve » 27 Dec 2023, 12:15

60-80ms, with mechanical keyboard, lowest is 33ms.

Post Reply