Blur Busters Forums

Who you gonna call? The Blur Busters! For Everything Better Than 60Hz™ Skip to content

Asus XG248q ELMB ghosting

Ask about motion blur reduction in gaming monitors. Includes ULMB (Ultra Low Motion Blur), NVIDIA LightBoost, ASUS ELMB, BenQ/Zowie DyAc, Turbo240, ToastyX Strobelight, etc.

Asus XG248q ELMB ghosting

Postby yodanimal » 19 Jul 2019, 12:56

Hi everyone, I've been lurking here for some time attempting to find a good middle ground fix, but I think I need some specific suggestions on what to do about this.

I'm seeing very noticeable artifacts, tearing, or ghosting effects during Fortnite. This is either from its constant fluctuating frames, or I am limiting my frames incorrectly. My frames in game can sometimes go from 300+ all the way down to maybe 120-150, rarely lower.

If I have ELMB on at 240hz, 200hz, 144hz, I am seeing this ghosting effect when spinning the camera around, which is terrible for building mechanic and close range tracking. Otherwise I am getting a ton of motion blur and screen tearing with ELMB off, and G-sync both on or off.

I'm exhausted on what to do, fiddled with dozens of combinations of refreshrates, V-sync on/off with G-sync on/off, Overdrive (0/1/2/3), in game limiting vs RTSS limiting or Scanline sync. And I don't mind adding input lag by improving the clarity of the game. Does anyone have a setting they recommend or have settled on for this balancing act?

Last night I was reading this behemoth of a thread "Why I'm done with 240hz" and feel like I'm even more confused on what settings to use now.

Asus XG248q
i5 6600k (OC 4.6Ghz)
MSI 1070 gaming x (OCed)
Corsair Vengeance LPX (2x8GB) 3000Mhz
Samsung M.2 ssd (OS and Fortnite)
Posts: 1
Joined: 24 Jun 2019, 19:28

Re: Asus XG248q ELMB ghosting

Postby Chief Blur Buster » 31 Jul 2019, 08:36

Forum threads about ghosting in non-strobe mode can be different from forum threads about ghosting (strobe crosstalk) in strobe mode. Do not confuse the two; on some models the differences are really big (e.g. Acer GN246HL is crappy at ghosting in non-strobe, but very good in LightBoost mode). So, first, let’s simplify the troubleshooting first. Sometimes the quality of strobe vs non-strobe corresponds but sometimes they diverge majorly if the factory tuning for one or the other is superior.

So let’s simplify troubleshooting.

First, test TestUFO.
Strobe crosstalk is sometimes a monitor limitation that is only fixed by switching brands of monitors.

Calibrate using

Article about strobe crosstalk:

First, try to get TestUFO as clear as possible before you start Fortnite again. Test all major refresh rates, including refresh rates as low as 100Hz and 120Hz, and see what refresh rate you get less crosstalk at. Also try the dynamic range compression trick (digitally brighten your blacks, digitally darken your whites) which can reduce ghosting and strobe crosstalk.

Currently, the best usually comes from NVIDIA implementations (LightBoost, ULMB), though one can get pretty good with calibrating a 144Hz 1080p BenQ gaming monitor and a few other models.
Head of Blur Busters - | | Follow @BlurBusters on Twitter

       To support Blur Busters:
       • Official List of Best Gaming Monitors
       • List of G-SYNC Monitors
       • List of FreeSync Monitors
       • List of Ultrawide Monitors
User avatar
Chief Blur Buster
Site Admin
Posts: 6267
Joined: 05 Dec 2013, 15:44

Return to Eliminating Motion Blur — LightBoost / ULMB / ELMB / DyAc

Who is online

Users browsing this forum: No registered users and 4 guests