Dear ViewSonic: Please Add 60 Hz Single-Strobe for PureXP on XG270

Ask about motion blur reduction in gaming monitors. Includes ULMB (Ultra Low Motion Blur), NVIDIA LightBoost, ASUS ELMB, BenQ/Zowie DyAc, Turbo240, ToastyX Strobelight, etc.
Kaykay
Posts: 2
Joined: 21 Jan 2020, 14:24

Re: Dear ViewSonic: Please Add 60 Hz Single-Strobe for PureXP on XG270

Post by Kaykay » 21 Jan 2020, 14:42

Is the new firmware already available? I downloaded the elite display Controller but there is no option to update the firmware.

elexor
Posts: 37
Joined: 07 Jan 2020, 04:53

Re: Dear ViewSonic: Please Add 60 Hz Single-Strobe for PureXP on XG270

Post by elexor » 23 Jan 2020, 05:55

This feature has not been added yet. what are the chances of us getting this firmware upgrade chief?

ThighHighGap
Posts: 2
Joined: 31 Jan 2020, 22:42

Re: Dear ViewSonic: Please Add 60 Hz Single-Strobe for PureXP on XG270

Post by ThighHighGap » 31 Jan 2020, 22:57

please viewsonic add this feature 60hz games are more enjoyable when you can eliminate blur

User avatar
AddictFPS
Posts: 191
Joined: 15 Jan 2020, 14:13

Re: Dear ViewSonic: Please Add 60 Hz Single-Strobe for PureXP on XG270

Post by AddictFPS » 01 Feb 2020, 13:13

Image
|-------------------------- Good Movement Focus ----------------------------| Image <<<<<<<<<<<<<<<<< Blurred Shit >>>>>>>>>>>>>>>>> Image
###################### 60 FPS SingleStrobe ######################### Vs ################ 60 FPS Non-Strobed ################

nuninho1980
Posts: 100
Joined: 26 Dec 2013, 09:49

Re: Dear ViewSonic: Please Add 60 Hz Single-Strobe for PureXP on XG270

Post by nuninho1980 » 05 Apr 2020, 17:34

Any news for single-strobe at 50Hz and 60Hz?
PC specs:
CPU: i7-4790K
RAM: 2x8GB DDR3@2400MHz
MB: ASUS Z97-Pro Gamer
GPU: EVGA GTX 980 Ti SC+ :D
Opt. disc: LG BD-RE writer BH16NS40
HDDs: SATA both 1TB+3TB
SSD: OCZ RD400 512GB
PSU: AEROCOOL 1kW 80+ Gold
Disly: CRT monitor 17" tmp

elexor
Posts: 37
Joined: 07 Jan 2020, 04:53

Re: Dear ViewSonic: Please Add 60 Hz Single-Strobe for PureXP on XG270

Post by elexor » 06 Apr 2020, 02:37

source mario 3 fast scrolling sprites

benq monitor 60hz sample and hold
Image
benq monitor 60hz with single strobe blur reduction + increased VT
Image

User avatar
AddictFPS
Posts: 191
Joined: 15 Jan 2020, 14:13

Re: Dear ViewSonic: Please Add 60 Hz Single-Strobe for PureXP on XG270

Post by AddictFPS » 11 Apr 2020, 20:03

Good post, the image quality improvement is so obvious... 60FPS locked games, 50/60p fast motion streamings, hope Viewsonic read this Topic and do not cap the XG270 strobe capabilities. Optional activation, so non sense cap it, there are people waiting this feature to buy this monitor, limit strobe = limit sales !!

Dave1980
Posts: 4
Joined: 20 Apr 2020, 04:24

Re: Dear ViewSonic: Please Add 60 Hz Single-Strobe for PureXP on XG270

Post by Dave1980 » 21 Apr 2020, 07:15

Hi there Chief and all Blurbuster readers, im completely new here and i recent discovered ULMB..

Sory for this short story but i have an urge to write it here.
By accident i discovered ULMB after i installed a new Geforce driver and i forgot to enable Gsync on my monitor plus i set the refreshrate on 85hz by my pure stupidity...
I saw the button ULMB and thought let me press it and see what happens in a game ... and thats when it happened...
PURE MAGIC.. i couldnt believe my eyes so beautiful.

ULMB effect in its full glory, never was i so happy to see and play a game so clear and fluid.( well at least when you can get 85, 100 or 120 fps at MINIMUM ).
I started to read what i was experiencing and what i just discovered ( i felt like Columbus discovering America).

My understanding is that whenever i fall down 85fps@85 hz ( and the other 2 ) the game would stutter judder microstutter etc. Although i have a RTX2080Ti and play in 1080p there are many games and game situations where i cannot hold 85fps so even when a game drops even like 5 fps, the stuttering is very visible and im pretty sensitive for stutter and especially microstutter.
I dont like to dial down settings except for AntiAliasing but other than that i want to play games super fluid in Ultra Epic Elite Godlike Über settings.
I started to experiment more and more, reading all kind blurbusters forum posts, watching clips on youtube, learning as an enthousiast!
So i tried to see if 60 fps @120 ( through adaptive sync half refreshrate ) would give me the same ULMBmagic but alas it wasnt as i hoped it to be because of the double picture, i think its called crosstalk or double strobbed image ? Correct me if i am wrong.

Now im looking for a new monitor that is capable of Single strobe @60 fps so the double image isnt there anymore. It isnt possible for my monitor to do the 60fps/hz hack because ofmy older model Gsync monitor.AOC G2460GP

So thats how i came to this thread because i want a new monitor and i and im 99% sure Viewsonic will implement your request and then i will buy it without thinking.
60 fps with a clear picture and motion blurr free will add me a whole library of games i will play again but due to the 60fps motion never touched them because i was so obssesed with 120/144 hz.
This could be a whole new gaming revolution for me.

User avatar
Chief Blur Buster
Site Admin
Posts: 7868
Joined: 05 Dec 2013, 15:44
Location: Toronto, Ontario, Canada
Contact:

Re: Dear ViewSonic: Please Add 60 Hz Single-Strobe for PureXP on XG270

Post by Chief Blur Buster » 22 Apr 2020, 02:24

Dave1980 wrote:
21 Apr 2020, 07:15
So i tried to see if 60 fps @120 ( through adaptive sync half refreshrate ) would give me the same ULMBmagic but alas it wasnt as i hoped it to be because of the double picture, i think its called crosstalk or double strobbed image ? Correct me if i am wrong.
Repeat-strobes on the same refresh cycle isn't technically strobe crosstalk.

Image

Strobe crosstalk is when you've got full framerate (fps=Hz) yet GtG pixel response is still overlapping more than 1 refresh cycle.

They can look similar, and they can combine to create even worse double-images, but requires totally different kinds of fixes (framerate increases versus GtG speedups)
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter

       To support Blur Busters:
       • Official List of Best Gaming Monitors
       • List of G-SYNC Monitors
       • List of FreeSync Monitors
       • List of Ultrawide Monitors

Dave1980
Posts: 4
Joined: 20 Apr 2020, 04:24

Re: Dear ViewSonic: Please Add 60 Hz Single-Strobe for PureXP on XG270

Post by Dave1980 » 22 Apr 2020, 12:55

Chief Blur Buster wrote:
22 Apr 2020, 02:24
Dave1980 wrote:
21 Apr 2020, 07:15
So i tried to see if 60 fps @120 ( through adaptive sync half refreshrate ) would give me the same ULMBmagic but alas it wasnt as i hoped it to be because of the double picture, i think its called crosstalk or double strobbed image ? Correct me if i am wrong.
Repeat-strobes on the same refresh cycle isn't technically strobe crosstalk.

Image9

Strobe crosstalk is when you've got full framerate (fps=Hz) yet GtG pixel response is still overlapping more than 1 refresh cycle.

They can look similar, and they can combine to create even worse double-images, but requires totally different kinds of fixes (framerate increases versus GtG speedups)
thank you for explaining that. 60fps @120hz creates exactely the 1/2 ufo picture. I can reduce that a little with ULMB plus width or with some settings its still there and ..distracting..

So did you get any word from Viewsonic or a status update about that request ?

Post Reply