How to use ulmb on Alienware 360hz

Ask about motion blur reduction in gaming monitors. Includes ULMB (Ultra Low Motion Blur), NVIDIA LightBoost, ASUS ELMB, BenQ/Zowie DyAc, Turbo240, ToastyX Strobelight, etc.
Post Reply
ysenojftw
Posts: 56
Joined: 17 Feb 2021, 23:53

How to use ulmb on Alienware 360hz

Post by ysenojftw » 11 Sep 2021, 15:44

I was wondering what the optimal settings for trying ulmb out on the 360hz Alienware. I am aware it will be forced down to 240hz, since I get 500-600 fps should I turn it on and then just play uncapped fps?

User avatar
Discorz
VIP Member
Posts: 999
Joined: 06 Sep 2019, 02:39
Location: Europe, Croatia
Contact:

Re: How to use ulmb on Alienware 360hz

Post by Discorz » 11 Sep 2021, 17:08

viewtopic.php?f=4&t=3555

Someone said they can't enable ULMB with amd gpu, so thats something to keep in mind.
Compare UFOs | Do you use Blur Reduction? | Smooth Frog | Latency Split Test
Alienware AW2521H, Gigabyte M32Q, Asus VG279QM, Alienware AW2518HF, AOC C24G1, AOC G2790PX, Setup

ysenojftw
Posts: 56
Joined: 17 Feb 2021, 23:53

Re: How to use ulmb on Alienware 360hz

Post by ysenojftw » 12 Sep 2021, 21:26

I have a 3070, not amd. Just wondering if overkill fps on ulmb will be fine without say vsync on or fps caps.

knypol
Posts: 76
Joined: 18 Aug 2016, 03:40

Re: How to use ulmb on Alienware 360hz

Post by knypol » 22 Sep 2021, 10:40

For best clarity in ULMB mode VSYNC ON is always the best choice. VSYNC also means higher input lag.
If u can achieve overkill fps try VSYNC OFF but bear in mind that GPU load around 100% will also increase input lag.

Post Reply