BenQ UNIVERSAL 144Hz->220Hz OVERCLOCK for 1080p 144 Hz

Talk about overclocking displays at a higher refresh rate. This includes homebrew, 165Hz, QNIX, Catleap, Overlord Tempest, SEIKI displays, certain HDTVs, and other overclockable displays.
MarkBurghouwt123
Posts: 5
Joined: 13 Jul 2020, 12:36

Re: BenQ UNIVERSAL 144Hz->220Hz OVERCLOCK for 1080p 144 Hz

Post by MarkBurghouwt123 » 13 Jul 2020, 14:29

macexx wrote:
20 Aug 2019, 15:02
Just bought an xl2411p today so ofc the first thing was to try this ;)

Could get it stable at 165hz with ama set to high/premium with DP/DVI-D,
200hz with ama off DP/DVI-D.

With ama high/premium i would get a picture at higher refresh rates but image was distorted same goes for AMA off and 220hz.
how did you do it i really dont understand anything im reading such as timing etc. i tried it with the automatic program, but it still shows out of range with all the same values put in as the original post at 155 hz.

MarkBurghouwt123
Posts: 5
Joined: 13 Jul 2020, 12:36

Re: BenQ UNIVERSAL 144Hz->220Hz OVERCLOCK for 1080p 144 Hz

Post by MarkBurghouwt123 » 13 Jul 2020, 15:16

Hello guys. I cant get the out of range message away. I have tried with 3 different programs already. the original one always says not responsive. the other 2 just dont work. am i doing something wrong? I have the XL2411P. please someone help

j0rpi
Posts: 1
Joined: 31 Jul 2020, 11:47

Re: BenQ UNIVERSAL 144Hz->220Hz OVERCLOCK for 1080p 144 Hz

Post by j0rpi » 31 Jul 2020, 11:49

MarkBurghouwt123 wrote:
13 Jul 2020, 15:16
Hello guys. I cant get the out of range message away. I have tried with 3 different programs already. the original one always says not responsive. the other 2 just dont work. am i doing something wrong? I have the XL2411P. please someone help
I have a XL2411P aswell, and i'm facing the same issues. Cannot get the "Out of Range" message to disappear, or make it display anything. Tried OORFFixer and OORBuster to no avail. I've only tried DP, as i have no access to a DVI-DL cable.

User avatar
Chief Blur Buster
Site Admin
Posts: 7758
Joined: 05 Dec 2013, 15:44
Location: Toronto, Ontario, Canada
Contact:

Re: BenQ UNIVERSAL 144Hz->220Hz OVERCLOCK for 1080p 144 Hz

Post by Chief Blur Buster » 02 Aug 2020, 19:33

One technique that makes this slightly easier is a unique resolution that only has the overclocked Hz -- for example 1920x1079 at the overclocked Hz.

By doing that, it forces a game to reduce the number of mode switches (and thus the number of timings resets needed, such as utilities such as https://github.com/hleVqq/OorBuster ...)
Head of Blur Busters - BlurBusters.com | TestUFO.com | Follow @BlurBusters on Twitter

       To support Blur Busters:
       • Official List of Best Gaming Monitors
       • List of G-SYNC Monitors
       • List of FreeSync Monitors
       • List of Ultrawide Monitors

stras
Posts: 1
Joined: 06 Aug 2020, 14:53

Re: BenQ UNIVERSAL 144Hz->220Hz OVERCLOCK for 1080p 144 Hz

Post by stras » 06 Aug 2020, 15:04

Hello!
XL2411P (2019 afaik) user here, managed to get stable with 212Hz, 213 also very usable, but gets a tiny artifact every few minutes on the bottom half of the screen. I use OorBuster with the settings on the first page and it works well, no frame skipping.
Attachments
EewsHT2WoAExjt9-másolata.jpg
EewsHT2WoAExjt9-másolata.jpg (331.19 KiB) Viewed 126 times
EewsG5bWAAMUrhj.jpg
EewsG5bWAAMUrhj.jpg (598.75 KiB) Viewed 126 times

Post Reply