LG 27GN600-B Overclock (OOR issues)
Posted: 08 Oct 2023, 01:45
Hey everyone,
I've been testing the overclocks on the monitor LG 27GN600-B (144hz), and I based myself on another topic in this forum (viewtopic.php?f=8&t=5544) and I was able to put it at 240hz without any blackscreen.
I was following the whole process and was going actually better than I actually thought I would go due to my experience, but problem is,
this monitor that I am overclocking has no "OSD language - 0xCC" (only appears on my 2nd monitor) and "Display application - 0xDC" doesn't even actually appear in any of the 2.
I was able to make the OOR disappear for a while by pressing the Activate on "OSD Language - OxCC", my windows + NVIDIA Control Panel was showing the 240hz and everything was "fine" at least I thought. But when I open a game it wasn't showing the 240hz, so I closed the game and when I closed it, the OOR started appearing again and then even if I go and press the "OSD language - 0xCC - Activate" it keeps popping the OOR. I also had tried to use CRU before but I couldn't even turn off the OOR anyways.
I am not sure if I actually need to change the timings manually or if I can just leave them as they are because I don't actually have the knowledge to mess with it. These are my timings in case I actually need to change something and anyone could help with it. https://imgur.com/a/oGUE4D9
Is there anything that I can do to make it 240hz or a bit lower, but make it actually work without any OOR, and appearing in my games?
Any help would be very appreciated.
I've been testing the overclocks on the monitor LG 27GN600-B (144hz), and I based myself on another topic in this forum (viewtopic.php?f=8&t=5544) and I was able to put it at 240hz without any blackscreen.
I was following the whole process and was going actually better than I actually thought I would go due to my experience, but problem is,
this monitor that I am overclocking has no "OSD language - 0xCC" (only appears on my 2nd monitor) and "Display application - 0xDC" doesn't even actually appear in any of the 2.
I was able to make the OOR disappear for a while by pressing the Activate on "OSD Language - OxCC", my windows + NVIDIA Control Panel was showing the 240hz and everything was "fine" at least I thought. But when I open a game it wasn't showing the 240hz, so I closed the game and when I closed it, the OOR started appearing again and then even if I go and press the "OSD language - 0xCC - Activate" it keeps popping the OOR. I also had tried to use CRU before but I couldn't even turn off the OOR anyways.
I am not sure if I actually need to change the timings manually or if I can just leave them as they are because I don't actually have the knowledge to mess with it. These are my timings in case I actually need to change something and anyone could help with it. https://imgur.com/a/oGUE4D9
Is there anything that I can do to make it 240hz or a bit lower, but make it actually work without any OOR, and appearing in my games?
Any help would be very appreciated.