Page 2 of 4

Re: No-latency overclockable (up to 1080p@~270Hz) board preo

PostPosted: 17 Mar 2016, 02:46
by Q83Ia7ta
lexlazootin wrote:How much does the actual panel matter? will some outperform others?

Definitely yes.

Re: No-latency overclockable (up to 1080p@~270Hz) board preo

PostPosted: 19 Mar 2016, 07:21
by lexlazootin
Q83Ia7ta wrote:Definitely yes.


Well if i wanted to get a particular panel for this project could i tell how well they will perform from TFT's panel parts?http://www.tftcentral.co.uk/articles/monitor_panel_parts.htm

Would a panel with better sRGB coverage look better? and a better response time react quicker? I kinda always thought that the chips would be the ones doing a lot of the work.

Re: No-latency overclockable (up to 1080p@~270Hz) board preo

PostPosted: 24 Mar 2016, 10:32
by cirthix
lexlazootin wrote:
Q83Ia7ta wrote:Definitely yes.


Well if i wanted to get a particular panel for this project could i tell how well they will perform from TFT's panel parts?http://www.tftcentral.co.uk/articles/monitor_panel_parts.htm

Would a panel with better sRGB coverage look better? and a better response time react quicker? I kinda always thought that the chips would be the ones doing a lot of the work.


If you truly want 'best', then you don't have many choices:
my board plus m270hhf-l10.
one of the 1440p ips gsync monitors
one of the 5K monitors like z27q. Last I looked, these were pretty good
some other serious color/work monitor. havent looked into these for a while.

Re: No-latency overclockable (up to 1080p@~270Hz) board preo

PostPosted: 30 Mar 2016, 08:52
by SpoCk0nd0pe
This seems very interesting. I got three noobish questions though:
Is 3d active possible with this (will I loose my 3d active capabilities)?
If yes: can I send frame packed 3d material at 1080p50 (HDMI 1.4 limitations really suck if you use SVP)?
Is the display port version freesync capable?

Thanks in advance!

Re: No-latency overclockable (up to 1080p@~270Hz) board preo

PostPosted: 10 May 2016, 02:48
by lexlazootin
I got my kit in yesterday! Wooo :mrgreen:

He helped me hook it up and get setup and it works like a charm!

Image

It gets 260~ but i do want to see if i can maybe swap some cables out and get some more hz out of it. Loving it so far!

I might do a more in depth post about it and make a enclosure but i just want to play around with it right now :lol:

Re: No-latency overclockable (up to 1080p@~270Hz) board preo

PostPosted: 10 May 2016, 14:30
by Q83Ia7ta
lexlazootin wrote:I got my kit in yesterday! Wooo :mrgreen:
He helped me hook it up and get setup and it works like a charm!

Which panel?

Re: No-latency overclockable (up to 1080p@~270Hz) board preo

PostPosted: 11 May 2016, 02:48
by lexlazootin
The m270hhf-l10.

I didn't feel up too taking apart my Benq XL2420G so he just shipped me a panel aswell.

Re: No-latency overclockable (up to 1080p@~270Hz) board preo

PostPosted: 25 May 2016, 10:53
by itatx
Nice 260Hz @ 1080P!

CIRTHIX, can you message me a price for the unit shipped pre-assembled with a m270hhf-l10 (if possible)?

TY :)

Re: No-latency overclockable (up to 1080p@~270Hz) board preo

PostPosted: 08 Jun 2016, 11:33
by Profiled
Does storbe backlight work on this? :shock:

Re: No-latency overclockable (up to 1080p@~270Hz) board preo

PostPosted: 11 Jun 2016, 11:03
by ARRG!
i'd also like to know if you would give me a price for the board or board\panel combo ? nice work !