i'll look back for the frameskipping info, thank you.Falkentyne wrote: ↑12 Dec 2020, 14:05Check my other posts on this matter.CubanLegend wrote: ↑11 Dec 2020, 21:53so why is it that sometimes my XL2720Z is stable with no frameskipping at 240 or 250hz but other times when i switch to those refresh rates, the strobe crosstalk test shows this annoying judder? the judder does now show in the Strobe Utlity's Crosstalk test though.Falkentyne wrote: ↑08 Dec 2020, 15:22You may have exceeded the capabilities of the panel.n1ghtik wrote: ↑05 Dec 2020, 04:23hello, I overclocked my benq xl2411 to 240Hz, but the problem is that only half of the screen is normal, on the other side there are small artifacts and the text becomes unreadable. Has anyone faced the same problem? I think this can be fixed because that one half of the screen is working fine.
Try 200hz, 210hz and 220hz. If those all work and 240hz fails to work, you found your answer. Not every screen is capable of being stable at such high refresh rates.
It means the exact timings used are not stable to the monitor scalar.
If you want the same refresh rate, you will need to mess with changing the horizontal and vertical total values, which will change the pixel clock slightly, but keep the same refresh rate. You have to mess around with it and find a HT/VT combination that will not cause frameskipping.
ah ok so i'll need to tweak the VT/HT even after setting your timings for 240/250? darn.. so they aren't stable across all panels even if the same XL2720 panel is what im using those timings on? odd
Also a general question.. I'm running in 165hz due to the high refresh and the 8bit color, but i get the Out of Range error popping up once im in a game (or even at the desktop), it happens EVERY TIME a few seconds after i enable the AMA Low tweak.. for some reason the OoRBuster isnt dismissing the Out of Range error? Here's my timing for the app: "...\OorBuster.exe" 2000 1500 250 3000 should i adjust the timings to get the OoRBuster to work...?
Even when i hit ALT+HOME as the Global Hotkey for OoRBuster, it resets my AMA settings, killing my Low AMA tweak..