hleV wrote: ↑02 Oct 2020, 11:17
Kulagin wrote: ↑02 Oct 2020, 07:49
When I press Apply, my screen goes black, then the Out Of Range message appears for a split second and quickly disappears(I guess, because OOR Buster is running and does its thing). Then after Out of Range message I see black screen and nothing is happening. I'm running OOR Buster with default settings, it says on github these are the defaults: 2000 500 250 3000. After 15 seconds it cancels that video mode and gets back to 144 Hz and I get my screen back.
Try increasing the timing of 2nd parameter to 1000 or 1500. Seems it successfully removes the OOR notification but fails to restore the picture mode, so it might need more delay for that.
Got it working at 210 Hz through DVI-D Dual-link Interface:
Used ToastyX's AMD/ATI Pixel Clock Patcher. OorBuster.exe 2000 1500 250 3000:
It frameskips at 205-209 and 211 Hz:
Made few tens of photos at 210 Hz to make sure it didn't frame skip, and it didn't.
Used 24, 3; 32, 5; 1984, 1094 values for all the refresh rates I tried:
Tried refresh rate 212, it black screens without the out of range message, just black screen like the monitor is completely off. Then when I press escape, it gets back to the previous refresh rate.
Also tried 211.5 and 211.42 refresh rates. It goes out of range like usual, then black screen, then shows image for a split second and then black screens until it gets back to the previous refresh rate. Didn't try to figure out to what limit 211-211.42 I can maximally push, because it frameskips at 211 Hz anyway, so whatever. 210 Hz it is for now. DisplayPort tomorrow