Hello, sorry if i've posted this in the wrong section.
I've recently bought the ASUS 24" VG249QM5A monitor and started reading about the best way to reduce input lag for games like CS2 and Valorant.
I've tried various settings and yesterday read about ELMB and i'm not sure what to use. So i'm wondering purely for FPS games whats the best settings to reduce input lag
Variable OD Level 1-5 , ELMB e.t.c
Thank you very much in advance.
ASUS 24" VG249QM5
- RealNC
- Site Admin
- Posts: 4657
- Joined: 24 Dec 2013, 18:32
- Contact:
Re: ASUS 24" VG249QM5
ELMB reduces motion blur, not input lag.
The monitor cannot reduce input lag in general. Your setting on your PC are responsible for that.
The monitor cannot reduce input lag in general. Your setting on your PC are responsible for that.
Steam • GitHub • Stack Overflow
The views and opinions expressed in my posts are my own and do not necessarily reflect the official policy or position of Blur Busters.
The views and opinions expressed in my posts are my own and do not necessarily reflect the official policy or position of Blur Busters.
- kyube
- Posts: 1030
- Joined: 29 Jan 2018, 12:03
Re: ASUS 24" VG249QM5
(Eye-tracked) motion blur is a form of latency, technically
A monitor can reduce (the total) input lag in form of better G2G RT performance & higher refresh rate, if by "input lag", one means total system latency.
This is, if one relies on the definition of "total system latency", that Nvidia uses for their Reflex explanations
evaluating xhci controller performance | audio latency discussion thread | "Why is LatencyMon not desirable to objectively measure DPC/ISR driver performance" | AM4 / AM5 system tuning considerations | latency-oriented HW considerations | “xhci hand-off” setting considerations | #1 tip for electricity-related topics | ESPORTS: Latency Perception, Temporal Ventriloquism & Horizon of Simultaneity | good lcd backlight strobing implementation list | display vs gpu scaling
-
huncho233
- Posts: 2
- Joined: 01 May 2026, 02:32
Re: ASUS 24" VG249QM5
Thanks for the quick responses. I now understand the PC Is responsible for this
Well a more direct question would be should i be using ELMB-Sync for games like CS2?
Well a more direct question would be should i be using ELMB-Sync for games like CS2?
- RealNC
- Site Admin
- Posts: 4657
- Joined: 24 Dec 2013, 18:32
- Contact:
Re: ASUS 24" VG249QM5
I don't have a display with that feature, but from what I'm reading about it, it sucks
Steam • GitHub • Stack Overflow
The views and opinions expressed in my posts are my own and do not necessarily reflect the official policy or position of Blur Busters.
The views and opinions expressed in my posts are my own and do not necessarily reflect the official policy or position of Blur Busters.
- kyube
- Posts: 1030
- Joined: 29 Jan 2018, 12:03
Re: ASUS 24" VG249QM5
Enable ELMB at maximum refresh rate and you'll achieve ~0,96ms strobe interval ("effective 1033Hz refresh rate")
Cap frame rate to refresh rate (to try and keep tearline at bay, can also resort to RTSS Scanline-Sync for best results in regards to tearing management at fixed refresh rate)
Play.
evaluating xhci controller performance | audio latency discussion thread | "Why is LatencyMon not desirable to objectively measure DPC/ISR driver performance" | AM4 / AM5 system tuning considerations | latency-oriented HW considerations | “xhci hand-off” setting considerations | #1 tip for electricity-related topics | ESPORTS: Latency Perception, Temporal Ventriloquism & Horizon of Simultaneity | good lcd backlight strobing implementation list | display vs gpu scaling
-
vnb
- Posts: 113
- Joined: 04 Nov 2025, 14:44
Re: ASUS 24" VG249QM5
no ELMB sucks
There are too many side effects such as eye strain, headaches, and fatigue for many people caused by the screen, without sufficient benefits to offset them.
